mxs: Boost the memory power supply

The memory power supply on MX23 didn't pump out enough juice into
the DRAM chip, thus caused occasional memory corruption. Fix this.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>

arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c

@@ -230,7 +230,7 @@ static void mx23_mem_setup_vddmem(void)
 	struct mxs_power_regs *power_regs =
 		(struct mxs_power_regs *)MXS_POWER_BASE;
 
-	writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+	writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
 		POWER_VDDMEMCTRL_ENABLE_ILIMIT |
 		POWER_VDDMEMCTRL_ENABLE_LINREG |
 		POWER_VDDMEMCTRL_PULLDOWN_ACTIVE,
@@ -238,7 +238,7 @@ static void mx23_mem_setup_vddmem(void)
 
 	early_delay(10000);
 
-	writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+	writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
 		POWER_VDDMEMCTRL_ENABLE_LINREG,
 		&power_regs->hw_power_vddmemctrl);
 }

board/olimex/mx23_olinuxino/spl_boot.c

@@ -29,7 +29,7 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
 
-#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
+#define	MUX_CONFIG_EMI	(MXS_PAD_3V3 | MXS_PAD_16MA | MXS_PAD_PULLUP)
 
 const iomux_cfg_t iomux_setup[] = {
 	/* DUART */