- May 22, 2017
-
-
Tom Rini authored
Commit 94e3c8c4 ("crypto/fsl - Add progressive hashing support using hardware acceleration.") created entries for CONFIG_SHA1, CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL. However, no defconfig has migrated to it. Complete the move by first adding additional logic to various Kconfig files to select this when required and then use the moveconfig tool. In many cases we can select these because they are required to implement other drivers. We also correct how we include the various hashing algorithms in SPL. This commit was generated as follows (after Kconfig additions): [1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL [2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL Note: We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously because there is dependency between them. Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Priyanka Jain <Priyanka.Jain@freescale.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Chander Kashyap <k.chander@samsung.com> Cc: Steve Rae <steve.rae@raedomain.com> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Feng Li <feng.li_2@nxp.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Sumit Garg <sumit.garg@nxp.com> Cc: Mingkai Hu <Mingkai.Hu@freescale.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
Tom Rini <trini@konsulko.com> Reviewed-by:
Simon Glass <sjg@chromium.org> Signed-off-by:
Tom Rini <trini@konsulko.com>
-
Tom Rini authored
We rename CONFIG_FIT_DISABLE_SHA256 to CONFIG_FIT_ENABLE_SHA256_SUPPORT which is enabled by default and now a positive option. Convert the handful of boards that were disabling it before to save space. Cc: Dirk Eibach <eibach@gdsys.de> Cc: Lukasz Dalek <luk0104@gmail.com> Signed-off-by:
Tom Rini <trini@konsulko.com> Reviewed-by:
Simon Glass <sjg@chromium.org> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Michal Simek authored
There is missing dependency on echo command. Mark tests which requires echo. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Reviewed-by:
Stephen Warren <swarren@nvidia.com>
-
Ley Foon Tan authored
This converts the following to Kconfig: CONFIG_SPL_BOARD_INIT Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com> [trini: Update the Kconfig logic] Signed-off-by:
Tom Rini <trini@konsulko.com>
-
- May 18, 2017
-
-
git://www.denx.de/git/u-boot-imxTom Rini authored
-
git://git.denx.de/u-boot-socfpgaTom Rini authored
-
git://git.denx.de/u-boot-usbTom Rini authored
-
Jean-Jacques Hiblot authored
SDIO is not supported in u-boot, there is no point in enabling mmc3. For this purpose, add u-boot specific dtsi that this will be included automatically while building the dtb. Signed-off-by:
Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by:
Tom Rini <trini@konsulko.com>
-
Tom Rini authored
The intention of having a -u-boot.dtsi file is to be able to make changes to the provided upstream dts files as well as to be able to add nodes. Change the logic for adding the file from making it the last included file at the top of the dts to being included at the end of the file. Cc: Jean-Jacques Hiblot <jjhiblot@ti.com> Cc: Simon Glass <sjg@chromium.org> Signed-off-by:
Tom Rini <trini@konsulko.com> Tested-by:
Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
-
Ley Foon Tan authored
Update Kconfig and Makefile to enable Arria 10. Clean up Makefile and sorting *.o alphanumerically. Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Add support for the Arria10 SoCDK. Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Add config and defconfig for the Arria10 and update socfpga_common.h. Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Add SPL support for Arria 10. Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Device tree files for Arria 10 Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Add misc support for Arria 10. Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Add pinmux support for Arria 10. Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Add sdram header file for Arria 10. Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Add system manager register struct and macros for Arria 10. Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Add clock driver support for Arria 10. Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Add reset driver support for Arria 10. Signed-off-by:
Tien Fong Chee <tien.fong.chee@intel.com> Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Add i2c, timer and other A10 macros. Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Restructure misc driver in the preparation to support A10. Move the Gen5 specific code to gen5 file. Change all uint32_t_to u32. Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Restructure system manager in the preparation to support A10. No functional change. Change uint32_t to u32. Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Restructure reset manager driver in the preparation to support A10. Move the Gen5 specific code to gen5 files. Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Ley Foon Tan authored
Restructure clock manager driver in the preparation to support A10. Move the Gen5 specific code to _gen5 files. - Change all uint32_t to u32 and change to use macro BIT(n) for bit shift. - Check return value from wait_for_bit(). So change return type to int for cm_write_with_phase() and cm_basic_init(). Signed-off-by:
Ley Foon Tan <ley.foon.tan@intel.com>
-
Liam Beguin authored
Add DM support for i2c functions. Signed-off-by:
Liam Beguin <lbeguin@tycoint.com> Signed-off-by:
Sylvain Lemieux <slemieux@tycoint.com> Reviewed-by:
Marek Vasut <marex@denx.de>
-
Peng Fan authored
Each time set_state is called, a new piece memory will be allocated for pin_data, but not freed, this will incur memory leak. When error, the devm API could not free memory automatically. So need call devm_kfree when error. Issue reported by Coverity Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de>
-
Stefano Babic authored
mx7dsabresd_secure_defconfig was not updated after moving to DM. Signed-off-by:
Stefano Babic <sbabic@denx.de>
-
Peng Fan authored
Switch to use DM USB. Signed-off-by:
Peng Fan <peng.fan@nxp.com>
-
Peng Fan authored
Reset ENET_RST_B to make ENET function stable. Since DM_GPIO enabled, we use "gpio_spi@0_5" which corresponds to ENET_RST_B. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
Peng Fan authored
Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO enabled. The 74x164 drivers needs SOFT_SPI and DM_GPIO enabled. So needs to enable them together. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
Peng Fan authored
Make oe-pins optional because some boards have fixed it to enable. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by:
Simon Glass <sjg@chromium.org>
-
Peng Fan authored
Add the Kconfig entry for SOFT_SPI which uses gpio to simulate the SPI signals. We use it for accessing 74x164 on some i.MX boards. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Stefano Babic <sbabic@denx.de>
-
Peng Fan authored
Add usdhc support Signed-off-by:
Peng Fan <peng.fan@nxp.com>
-
Peng Fan authored
Add i2c support. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
Peng Fan authored
Add regulator node for usb and mmc. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
Peng Fan authored
Add spi gpio node for 74LV595. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
Peng Fan authored
Add basic dts for i.MX7D-SDB board. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
-
Peng Fan authored
Sync with Linux commit 308ac756("Merge tag 'gpio-v4.11-3'"). Signed-off-by:
Peng Fan <peng.fan@nxp.com> Cc: Stefan Agner <stefan.agner@toradex.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by:
Stefano Babic <sbabic@denx.de>
-