Signed-off-by: Mike Frysinger <vapier@gentoo.org>

If the param pass to get_dev is not the one defined in the block_drvr,
it could make uboot becomes unstable, for it would continue run after
search complete the block_drvr table.

Signed-off-by: Lei Wen <leiwen@marvell.com>

* The sector size for SPI-dataflash (like AT45 flashes) are not always
  a power-of-2. So, the sector calculations are rewritten such that it
  works for either power-of-2 as any size sectors.
* Make the flash sector size optional in case it is the same value as
  the environment size.

Signed-off-by: Remy Bohmer <linux@bohmer.net>

Signed-off-by: Wolfgang Denk <wd@denx.de>

1. Move header to include/faraday
2. Fix include path in ftwdt010_wdt.c
3. Fix function prototype and declaration to
  - ftwdt010_wdt_settimeout
  - ftwdt010_wdt_reset
  - ftwdt010_wdt_disable
4. Add "#if definde (CONFIG_HW_WATCHDOG)" let user have flexibilty
  to choose which better to his product.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

This patch fixes following warning message:

---8<---
cmd_bdinfo.c:458: warning: initialization from incompatible pointer type
--->8---

There was a prototype change in 54841ab5 for
argv[] pointer type to const. This change was not made for AVR32 cause this
code came in later by a merge.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>

This patch fixes warnings in MAKEALL for avr32:

---8<---
cmd_nvedit.c: In function 'do_env_export':
cmd_nvedit.c:663: warning: format '%zX' expects type 'size_t', but argument 3 has type 'ssize_t'
--->8---

Signed-off-by: Andreas Biemann <biessmann@corscience.de>

Rename STANDALONE_LOAD_ADDR into CONFIG_STANDALONE_LOAD_ADDR
and allow that the architecture-specific default value gets
overwritten by defining the value in the board header file.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: Tsi Chung Liew <tsi-chung.liew@freescale.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

"make tools-all" should allow building tools such as mkimage and the new
imximage without any config, but imximage.c currently fails to build
with:
imximage.h:27:20: error: config.h: No such file or directory

config.h is not needed in imximage.h nor in imximage.c, and imximage.h
is only included from imximage.c, so drop this include to fix the build.

Signed-off-by: Loc Minier <loic.minier@linaro.org>

Signed-off-by: Loc Minier <loic.minier@linaro.org>

Signed-off-by: Catalin Radu <Catalin@VirtualMetrix.com>

There is a bug in the min and max macros in common.h which occurs if
Y is a larger type than X. For example, if Y is a 64-bit value and X
is a 32-bit value then Y will be truncated to 32-bits.  This fix
matches what is done in the Linux kernel but without the additional
type checking present in the kernel version.

Signed-off-by: Aaron Williams <aaron.williams@caviumnetworks.com>

Faraday ftwdt010 watchdog is an architecture independant
watchdog. It is usually used in SoC chip design.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>

this board was cancelled long time ago so remove it as it won't
be maintained anymore

Signed-off-by: Eric Bnard <eric@eukrea.com>

This reads the DIP switch on mgcoge. The DIP switch is connected to
the BFTICU (0x40000089) FPGA. If the DIP switch is set the environment
variable 'actual_bank' is set to 0 and starts the SW in bank0.

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>

On first HW versions the BOCO FPGA was behind a MUX device. These
HW versions are not supported anymore. And therefore this code can
be removed, it is already unused.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>

Add Intel E1000 82574L PCIe card support. Test on MPC8544DS
and MPC8572 board.
Add the missing contact information for future support.

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>

-msingle-pic-base is a new gcc option for ppc and
it reduces the size of my u-boot with 6-8 KB.
While at it, add -fno-jump-tables too to save a
few more bytes.

-msingle-pic-base will be in gcc 4.6, however
backported patches are available at
http://bugs.gentoo.org/show_bug.cgi?id=347281



Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

The -fPIC flag belongs with -mrelocatable, move it there.
Also change -fPIC to -fpic as this produces smaller
binaries.
However, currently -mrelocatable promotes -fpic to -fPIC, a
fix for this is in upcoming gcc 4.6 or you can apply this small
patch to gcc:

diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h
index 8da8410..e4b8280 100644
--- a/gcc/config/rs6000/sysv4.h
+++ b/gcc/config/rs6000/sysv4.h
@@ -227,7 +227,8 @@ do {									\
     }									\
 									\
   else if (TARGET_RELOCATABLE)						\
-    flag_pic = 2;							\
+    if (!flag_pic)							\
+      flag_pic = 2;							\
 } while (0)

 #ifndef RS6000_BI_ARCH
--

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>

This patch fixes ea20 after 8ef583a0 where
the u-boot custom PHY_ macros were replaced with those of linux/mii.h MII_
definitions except in the RMII support for davinci_emac. Probably also due to
the merge path of changes in 2010.12.

Signed-off-by: Ben <Gardiner&lt;bengardiner@nanometrics.ca>
CC: Mike Frysinger <vapier@gentoo.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>

This patch fixes ea20 after commit 6d8962e8
where $(obj)lib$(BOARD).a was changed to $(obj)lib$(BOARD).o in almost all the
Makefiles except ea20, probably due to merge path of the changes in 2010.12.

Signed-off-by: Ben <Gardiner&lt;bengardiner@nanometrics.ca>
CC: Sebastien Carlier <sebastien.carlier@gmail.com>
Acked-by : Stefano Babic <sbabic@denx.de>

For uImage always has a 64 bytes header, we couldn't expect to do
the xip from the header but should xip from the image start.

The latter logic in that section is also move the image from image_start
to the load address, so sync this logic to the xip operation.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

All of the spi flash drivers implement the status register polling for
detecting the device ready state, so unify them all in a new helper
function -- spi_flash_wait_ready.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

These functions largely do the same exact thing, so unify them all
into one basic function.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Removed clearing of L2 cache as SRAM as it is not necessary without ECC.
This also speeds up the booting process.

Signed-off-by: Fabian Cenedese <cenedese@indel.ch>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

P1010 and P1014 has v2.3 version of FSL eSDHC controller in which watermark
level register description has been changed:

9-15 bits represent WR_WML[0:6], Max value = 128 represented by 0x00
25-31 bits represent RD_WML[0:6], Max value = 128 represented by 0x00

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Poonam Aggrwal <Poonam.Aggrwal@freescale.com>
Tested-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

PBL(pre-boot loader): SPI flash used as RCW(Reset Configuration Word) and
PBI(pre-boot initialization) source, CPC(CoreNet Platform Cache) used as
1M SRAM where PBL will copy whole U-BOOT image to, U-boot can boot from
CPC after PBL completes RCW and PBI phases.

Signed-off-by: Chunhe Lan <b25806@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Shaohui Xie <b21989@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Set default configuration to have SDHC controller enabled,
AUDIO enabled(codec clock sources is 12MHz) and disable TDM.

Signed-off-by: Jiang Yutang <b14898@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

For soc which have pin multiplex relation, some of them can't enable
simultaneously. This patch add environment var 'hwconfig' content
defination for them. you can enable some one function by setting
environment var 'hwconfig' content and reset board. Detail setting
please refer doc/README.p1022ds

Signed-off-by: Jiang Yutang <b14898@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Make the support for ATI graphics cards mutually exclusive with DIU.

Signed-off-by: Jiang Yutang <b14898@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Remove the SERDES8 erratum work-around code that only applied to P4080
rev1, which is not supported by this version of U-Boot.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Add documentation for the "serdes" hwconfig option, which is used to
specify the status of SerDes banks two and three for the SERDES8 erratum
work-around.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

We don't really ever use Video cards on corenet_ds style boards and its
bloating our image which is close the its max size.  Drop support and
also kill some defines for non-PNP PCI which we never use.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Flash might be in unknown state when u-boot is started with jtag.
And got wrong env data. So reset it in board early init.

We cannot use generic cfi flash routines, because flash_init() is
not run yet.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>

renaming 85xx define CONFIG_NAND_OR_PRELIM to CONFIG_SYS_NAND_OR_PRELIM
and CONFIG_NAND_BR_PRELIM to CONFIG_SYS_NAND_BR_PRELIM to use the more
appropriate CONFIG_SYS prefix as well as be consistent with 83xx.

Signed-off-by: Matthew McClintock <msm@freescale.com>
cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>