This patch cleans up multiple issues of the 4xx register (mostly
DCR, SDR, CPR, etc) definitions:

- Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
- Change the defines to better match the names from the
  user's manuals (e.g. cprpllc -> CPR0_PLLC)
- Removal of some unused defines

Please test this patch intensive on your PPC4xx platform. Even though
I tried not to break anything and tested successfully on multiple
4xx AMCC platforms, testing on custom platforms is recommended.

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
Acked-by: Heiko Schocher <hs@denx.de>

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>

This patch adds support for "kwbimage" (Kirkwood Boot Image)
image types to the mkimage code.

For details refer to docs/README.kwbimage

This patch is tested with Sheevaplug board

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Ron Lee <ron@debian.org>

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

- make get_table_entry_id() global
- make get_table_entry_name() global
- move struct table_entry to image.h

Currently this code is used by image.c only.

This patch makes this API global so it can be used by other parts of
code, too.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Ron Lee <ron.debian.org>

Edit comments and commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Currently it is used by image.c only, but the the function can be
used to support additional mkimage types like for example kwbimage,
so make this function globally visible.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Include default_image.o and fit_image.o into the build dependency
calculations. This makes sure they get rebuilt if any of the headers
they include are modified

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Acked-by: Ron Lee <ron@debian.org>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>

This fixes some compiler warnings:
tools/default_image.c:141: warning: initialization from incompatible pointer type
tools/fit_image.c:202: warning: initialization from incompatible pointer type
and changes to code to use "const" attributes in a few places where
it's appropriate.

Signed-off-by: Wolfgang Denk <wd@denx.de>

This is a first step towards reorganizing the mkimage code to make it
easier to add support for additional images types. Current mkimage
code is specific to generating uImage and FIT image files, but the
same framework can be used to generate other image types like
Kirkwood boot images (kwbimage-TBD). For this, the mkimage code gets
reworked:

Here is the brief plan for the same:-
a) Split mkimage code into core and image specific support
b) Implement callback functions for image specific code
c) Move image type specific code to respective C files
       Currently there are two types of file generation/list
       supported (i.e uImage, FIT), the code is abstracted from
       mkimage.c/.h and put in default_image.c and fit_image.c;
       all code in these file is static except init function call
d) mkimage_register API is added to add new image type support
All above is addressed in this patch
e) Add kwbimage type support to this new framework (TBD)
This will be implemented in a following commit.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Edit commit message, fix coding style and typos.
Signed-off-by: Wolfgang Denk <wd@denx.de>

uninitialized retval variable warning fixed
crc32 APIs moved to crc.h (newly added) and build warnings fixed

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>

The tools/Makefile is sorted for all entries,

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

List command always return "EXIT_SUCCESS" even in case of
failure by any means.

This patch return 0 if list command is sucessful,
returns negative value reported by check_header functions

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>

Then we can handle different config targets in the board file, which
simplifies the top level Makefile for boards that have multiple
config targets.

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>

Commit 65f6f07b added support for the atmel_df_pow2 standalone program
but missed to add a rule to remove it to the "clean" make target.

Signed-off-by: Wolfgang Denk <wd@denx.de>

This patch fixes the following compilation warning:

miiphy.c: In function 'emac4xx_miiphy_read':
miiphy.c:353: warning: dereferencing type-punned pointer will break
strict-aliasing rules

Signed-off-by: Stefan Roese <sr@denx.de>

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

This patch adds the CONFIG_PCI_4xx_PTM_OVERWRITE option and replaces
the ugly 'if defined(BOARD1) || ... || defined(BOARDn)' construct
in 4xx pci code.

When CONFIG_PCI_4xx_PTM_OVERWRITE is defined the default ptm register
setup can be overwritten through environment variables ptm1la, ptm1ms,
ptm2la and ptm2ms to do application specific pci target BAR configuration.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

This patch fixes PMC405DE support. Patch 85d6bf0b fixed out-of-tree
building for this board but the loadpci object did not get linked
after that.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>

Using a separate "u-boot" environment variable allows to easily
specify different filenames for the update procedure.  This is also in
line with many other board configurations defining an "update" script.

Signed-off-by: Detlev Zundel <dzu@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>

Some board ports place TEXT_BASE at a location that would cause the
RESET_VECTOR_ADDRESS not to be at 0xfffffffc when we link.  By default
we assume RESET_VECTOR_ADDRESS will be 0xfffffffc if the board doesn't
explicitly set it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Wolfgang Denk <wd@denx.de>

There is no reason to do a run time check for e500 v1 based cores to
determine if we have the GUTs RSTCR facility.  Only the first generation
of PQ3 parts (MPC8540/41/55/60) do not have it.  So checking to see if
we are e500 v2 would miss future parts (like e500mc).

Just change this to be ifdef'd based on CONFIG_MPC85{40,41,55,60}.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

While in probecpu() UART is still not initialized.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Fixing the number of cores in the device tree based on the actual number of
cores on the system.  With this same device tree image can be used for dual
core and single core members of otherwise exactly same SOC.

For example:
* P2020RDB and P2010RDB
* P1020RDB and P1011RDB
* MPC8641D and MPC8641

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Incase the system is detected with Unknown SVR, let the system boot
with a default value and a proper message.

Now with dynamic detection of SOC properties from SVR, this is necessary
to prevent a crash.

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Refactor the code into a simple bitmask lookup table that determines if
a given PCI controller is enabled and if its in host/root-complex or
agent/end-point mode.

Each processor in the PQ3/MPC86xx family specified different encodings
for the cfg_host_agt[] and cfg_IO_ports[] boot strapping signals.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Cleaned up cpu/mpc85xx/Makefile to use CONFIG_* for those obvious cases
we have like PCI, CPM2, QE.  Also reworked it to use one line per file
for everything and sorted in alphabetical order.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

After programming a new LAW, we should read-back the LAWAR register so that
we sync the writes.  Otherwise, code that attempts to use the new LAW-mapped
memory might fail right away.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Its possible that we try and copy the boot page code out of flash into a
DDR location that doesn't have a TLB cover it.  For example, if we have
3G of DDR we typically only map the first 2G.  In the cases of 4G+ this
wasn't an issue since the reset page TLB mapping covered the last page
of memory which we wanted to copy to.

We now change the physical address of the reset page TLB to map to the
true physical location of the boot page code, copy and than set the
TLB back to its 1:1 mapping of the reset page.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Allow us to search the TLB array based on an address.  This is useful
if we want to change an entry but dont know where it happens to be
located.

For example, the boot page mapping we use on MP or the flash TLB that
we change the WIMGE settings for after we've relocated.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

In future Book-E implementations IVORs will most likely go away and be
replaced with fixed offsets.  The IVPR will continue to exist to allow
for relocation of the interrupt vectors.

This code adds support to setup the IVORs as their fixed offset values
per the ISA 2.06 spec when we transition from u-boot to another OS
either via 'bootm' or a cpu release.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

The ddr_pd_cntl isn't defined in any reference manual and thus we wil
remove especially since we set it to 0, which would most likely be its
POR value.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Now that we have a pointer to the cpu struct we need to relocate it once
we get into ram.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

The warning is bogus, so silence it by initializing the 'ret' variable.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Enable eSDHC Clock based on generic CONFIG_FSL_ESDHC define instead of a
platform define.  This will enable all the 85xx platforms to use sdhc_clk
based on CONFIG_FSL_ESDHC.

Signed-off-by: Gao Guanhua <B22826@freescale.com>
Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

The value of I2C_TIMEOUT in fsl_i2c.c has several problems.  First, it is
defined as CONFIG_HZ/4, but it is used as a count of microseconds, so it makes
no sense to derive it from a clock rate.  Second, the current value (250) is
too low for some boards, so it needs to be increased.  Third, the timeout
necessary for multiple-master arbitration is larger than the timeout for basic
read/write operations, so we shouldn't have a single constant for both timeouts.
Finally, it would be nice if we could override these values on a per-board
basis.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Tested-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Peter Tyser <ptyser@xes-inc.com>