pgr_support and alua_support device attributes show the inverted value of
the transport_flags:

 * TRANSPORT_FLAG_PASSTHROUGH_PGR
 * TRANSPORT_FLAG_PASSTHROUGH_ALUA

These attributes are per device, while the flags are per backend. Rename
the transport_flags in backend/transport to transport_flags_default and use
this value to initialize the new transport_flags field in the se_device
structure.

Now data and attribute both are per se_device.

Link: https://lore.kernel.org/r/20200427150823.15350-4-bstroesser@ts.fujitsu.com


Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

tcmu has not set TRANSPORT_FLAG_PASSTHROUGH_PGR. Therefore the in-core pr
emulation is active by default, but there are some attributes for
configuration missing. Add them.

Link: https://lore.kernel.org/r/20200427150823.15350-3-bstroesser@ts.fujitsu.com


Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In commit b49d6f78 ("scsi: target: add emulate_pr backstore attr to
toggle PR support") the new attribute emulate_pr was added.

passthrough_parse_cdb() uses the attribute's value to distinguish whether
reservation commands should be rejected or not.  But the new attribute was
not added to passthrough_attrib_attrs, so in pscsi and tcmu - the users of
passthrough_parse_cdb() - the attribute is not available to change parser's
behavior.

Link: https://lore.kernel.org/r/20200427150823.15350-2-bstroesser@ts.fujitsu.com


Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

By default DIF Type 1, DIF Type 2 & DIF Type 3 will be enabled.  Also,
users can enable either DIF Type 1 or DIF Type 2 or DIF Type 3 or in any
combination using the prot_mask module parameter.

However, when the user provides a prot_mask module parameter value of zero,
then the driver is not disabling the DIF. Instead it enables all three
types.

Modify the driver to disable the DIF support if the user provides a
prot_mask module parameter value of zero.

Link: https://lore.kernel.org/r/1588065902-2726-1-git-send-email-sreekanth.reddy@broadcom.com


Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Updated maintainers list for MPT DRIVERS

Link: https://lore.kernel.org/r/1588056428-29369-1-git-send-email-suganath-prabu.subramani@broadcom.com


Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Information needed to debug driver problems and firmware faults is stored
in the IOC’s MPT3SAS_ADAPTER data structure. Parameters such as IOCFacts,
IOC flags (related to sge, MSI-X, error recovery etc.), performance mode
type, TMs, internal commands reply status, etc. are present.

For debugging purposes, it is therefore helpful to be able to capture this
information so that the fault can be analyzed. Export the MPT3SAS_ADAPTER
data structure in debugfs. The data is available in:

	 /sys/kernel/debug/mpt3sas/scsi_hostX/ioc_dump

Link: https://lore.kernel.org/r/1588056322-29227-1-git-send-email-suganath-prabu.subramani@broadcom.com


Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix the following coccicheck warning:

drivers/scsi/mpt3sas/mpt3sas_base.c:7202:1-19: WARNING: Assignment of
0/1 to bool variable

Link: https://lore.kernel.org/r/20200430121738.15151-1-yanaijie@huawei.com


Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix the following coccicheck warning:

drivers/scsi/vmw_pvscsi.c:911:2-18: WARNING: Assignment of 0/1 to bool
variable

Link: https://lore.kernel.org/r/20200430121729.15064-1-yanaijie@huawei.com


Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix the following coccicheck warning:

drivers/scsi/fnic/fnic_scsi.c:2627:5-36: WARNING: Comparison of 0/1 to
bool variable

Link: https://lore.kernel.org/r/20200430121718.14970-1-yanaijie@huawei.com


Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix the following coccicheck warning:

drivers/scsi/qedi/qedi_main.c:1309:5-25: WARNING: Comparison of 0/1 to
bool variable
drivers/scsi/qedi/qedi_main.c:1315:5-25: WARNING: Comparison of 0/1 to
bool variable

Link: https://lore.kernel.org/r/20200430121706.14879-1-yanaijie@huawei.com


Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix the following sparse warnings:

drivers/scsi/aacraid/linit.c:867:6: warning:
symbol 'aac_tmf_callback' was not declared. Should it be static?
drivers/scsi/aacraid/linit.c:1081:5: warning:
symbol 'aac_eh_host_reset' was not declared. Should it be static?
drivers/scsi/aacraid/commsup.c:2354:5: warning:
symbol 'aac_send_safw_hostttime' was not declared. Should it be static?
drivers/scsi/aacraid/commsup.c:2383:5: warning:
symbol 'aac_send_hosttime' was not declared. Should it be static?

Link: https://lore.kernel.org/r/1588240932-69020-1-git-send-email-zou_wei@huawei.com


Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

No other functions use the return value of qlafx00_process_aen() and the
return value is always 0 now. Make it return void. This fixes the following
coccicheck warning:

drivers/scsi/qla2xxx/qla_mr.c:1716:5-9: Unneeded variable: "rval".
Return "0" on line 1768

Link: https://lore.kernel.org/r/20200506061757.19536-1-yanaijie@huawei.com


Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix the following coccicheck warning:

drivers/scsi/qla2xxx/qla_tmpl.c:1120:2-20: WARNING: Assignment of 0/1 to
bool variable

Link: https://lore.kernel.org/r/20200430121800.15323-1-yanaijie@huawei.com


Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Fix the following coccicheck warning:

drivers/scsi/qla2xxx/qla_tmpl.c:1031:6-20: WARNING: Assignment of 0/1 to
bool variable
drivers/scsi/qla2xxx/qla_tmpl.c:1062:3-17: WARNING: Assignment of 0/1 to
bool variable

Link: https://lore.kernel.org/r/20200430121751.15232-1-yanaijie@huawei.com


Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The return value is not used by the caller and the local variable 'rc' is
not needed. Make qla_set_ini_mode() return void and remove 'rc'.  This also
fixes the following coccicheck warning:

drivers/scsi/qla2xxx/qla_attr.c:1906:5-7: Unneeded variable: "rc".
Return "0" on line 2180

Link: https://lore.kernel.org/r/20200429140952.8240-1-yanaijie@huawei.com


Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The goal of the following command sequence is to restart the adapter.
However, the tgt_stop flag remains set, indicating that the adapter is
still in stopping state even after re-enabling it.

echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging
modprobe target_core_mod
modprobe tcm_qla2xxx
mkdir /sys/kernel/config/target/qla2xxx
mkdir /sys/kernel/config/target/qla2xxx/<port-name>
mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable

kernel: PID 1396:qla_target.c:1555 qlt_stop_phase1(): tgt_stop 0x0, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-e803:1: PID 1396:qla_target.c:1567: Stopping target for host 1(c0000000033557e8)
kernel: PID 1396:qla_target.c:1579 qlt_stop_phase1(): tgt_stop 0x1, tgt_stopped 0x0
kernel: PID 1396:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-e801:1: PID 1396:qla_target.c:1316: Scheduling sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7
<skipped>
kernel: qla2xxx [0001:00:02.0]-290a:1: PID 340:qla_target.c:1187: qlt_unreg_sess sess c00000002d5cd800 for deletion 21:00:00:24:ff:7f:35:c7
<skipped>
kernel: qla2xxx [0001:00:02.0]-f801:1: PID 340:qla_target.c:1145: Unregistration of sess c00000002d5cd800 21:00:00:24:ff:7f:35:c7 finished fcp_cnt 0
kernel: PID 340:qla_target.c:1155 qlt_free_session_done(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled.
<skipped>
kernel: qla2xxx [0001:00:02.0]-28f1:1: PID 346:qla_os.c:3956: Mark all dev lost
kernel: PID 346:qla_target.c:1266 qlt_schedule_sess_for_deletion(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end.
<skipped>
kernel: PID 1396:qla_target.c:6812 qlt_enable_vha(): tgt_stop 0x1, tgt_stopped 0x0
<skipped>
kernel: qla2xxx [0001:00:02.0]-4807:1: PID 346:qla_os.c:6329: ISP abort scheduled.
<skipped>
kernel: qla2xxx [0001:00:02.0]-4808:1: PID 346:qla_os.c:6338: ISP abort end.

qlt_handle_cmd_for_atio() rejects the request to send commands because the
adapter is in the stopping state:

kernel: PID 0:qla_target.c:4442 qlt_handle_cmd_for_atio(): tgt_stop 0x1, tgt_stopped 0x0
kernel: qla2xxx [0001:00:02.0]-3861:1: PID 0:qla_target.c:4447: New command while device c000000005314600 is shutting down
kernel: qla2xxx [0001:00:02.0]-e85f:1: PID 0:qla_target.c:5728: qla_target: Unable to send command to target

This patch calls qla_stop_phase2() in addition to qlt_stop_phase1() in
tcm_qla2xxx_tpg_enable_store() and tcm_qla2xxx_npiv_tpg_enable_store(). The
qlt_stop_phase1() marks adapter as stopping (tgt_stop == 0x1, tgt_stopped
== 0x0) but qlt_stop_phase2() marks adapter as stopped (tgt_stop == 0x0,
tgt_stopped == 0x1).

Link: https://lore.kernel.org/r/52be1e8a3537f6c5407eae3edd4c8e08a9545ea5.camel@yadro.com


Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Viacheslav Dubeyko <v.dubeiko@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The following sequence of commands result in an incorrect failure message
being printed:

echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging
modprobe target_core_mod
modprobe tcm_qla2xxx
mkdir /sys/kernel/config/target/qla2xxx
mkdir /sys/kernel/config/target/qla2xxx/<port-name>
mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable

qla2xxx [0001:00:02.0]-e881:1: qla2x00_wait_for_hba_online() failed

The reason of this message is the QLA_FUNCTION_FAILED code that
qla2x00_wait_for_hba_online() returns. However, qlt_disable_vha() expects
that adapter is offlined and QLA_FUNCTION_FAILED informs about the offline
state of the adapter.

The qla2x00_abort_isp() function finishes the execution at the point of
checking the adapter's mode (for example, qla_tgt_mode_enabled()) because
of the qlt_disable_vha() calls qlt_clear_mode() method. It means that
qla2x00_abort_isp() keeps vha->flags.online is equal to zero. Finally,
qla2x00_wait_for_hba_online() checks the state of this flag and returns
QLA_FUNCTION_FAILED error code.

This patch changes the failure message which informs about adapter's
offline state.

Link: https://lore.kernel.org/r/3cd0bbf3599c53b0c2a7184582d705d8b8052c8b.camel@yadro.com


Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Viacheslav Dubeyko <v.dubeiko@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Currently, FC target reset finishes with the warning message:

[84010.596893] ------------[ cut here ]------------
[84010.596917] WARNING: CPU: 238 PID: 279973 at ../drivers/scsi/qla2xxx/qla_target.c:6644 qlt_enable_vha+0x1d0/0x260 [qla2xxx]
[84010.596918] Modules linked in: vrf af_packet 8021q garp mrp stp llc netlink_diag target_tatlin_tblock(OEX) dm_ec(OEX) ttln_rdma(OEX) dm_frontend(OEX) nvme_rdma nvmet tcm_qla2xxx iscsi_target_mod target_core_mod at24 nvmem_core pnv_php ipmi_watchdog ipmi_ssif vmx_crypto gf128mul crct10dif_vpmsum qla2xxx rpcrdma nvme_fc powernv_flash(X) nvme_fabrics uio_pdrv_genirq mtd rtc_opal(X) ibmpowernv(X) opal_prd(X) uio scsi_transport_fc i2c_opal(X) ses enclosure ipmi_poweroff ast i2c_algo_bit ttm bmc_mcu(OEX) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks agpgart nfsd auth_rpcgss nfs_acl ipmi_powernv(X) lockd ipmi_devintf ipmi_msghandler grace dummy ext4 crc16 jbd2 mbcache sd_mod rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm
[84010.596975]  configfs mlx5_ib ib_uverbs ib_core mlx5_core crc32c_vpmsum xhci_pci xhci_hcd mpt3sas(OEX) tg3 usbcore mlxfw tls raid_class libphy scsi_transport_sas devlink ptp pps_core nvme nvme_core sunrpc dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4
[84010.597001] Supported: Yes, External
[84010.597004] CPU: 238 PID: 279973 Comm: bash Tainted: G           OE      4.12.14-197.29-default #1 SLE15-SP1
[84010.597006] task: c000000a104c0000 task.stack: c000000b52188000
[84010.597007] NIP: d00000001ffd7f78 LR: d00000001ffd7f6c CTR: c0000000001676c0
[84010.597008] REGS: c000000b5218b910 TRAP: 0700   Tainted: G           OE       (4.12.14-197.29-default)
[84010.597008] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>
[84010.597015]   CR: 48242424  XER: 00000000
[84010.597016] CFAR: d00000001ff45d08 SOFTE: 1
               GPR00: d00000001ffd7f6c c000000b5218bb90 d00000002001b228 0000000000000102
               GPR04: 0000000000000001 0000000000000001 00013d91ed0a5e2d 0000000000000000
               GPR08: c000000007793300 0000000000000000 0000000000000000 c000000a086e7818
               GPR12: 0000000000002200 c000000007793300 0000000000000000 000000012bc937c0
               GPR16: 000000012bbf7ed0 0000000000000000 000000012bc3dd10 0000000000000000
               GPR20: 000000012bc4db28 0000010036442810 000000012bc97828 000000012bc96c70
               GPR24: 00000100365b1550 0000000000000000 00000100363f3d80 c000000be20d3080
               GPR28: c000000bda7eae00 c000000be20db7e8 c000000be20d3778 c000000be20db7e8
[84010.597042] NIP [d00000001ffd7f78] qlt_enable_vha+0x1d0/0x260 [qla2xxx]
[84010.597051] LR [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx]
[84010.597051] Call Trace:
[84010.597061] [c000000b5218bb90] [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] (unreliable)
[84010.597064] [c000000b5218bc20] [d000000009820b6c] tcm_qla2xxx_tpg_enable_store+0xc4/0x130 [tcm_qla2xxx]
[84010.597067] [c000000b5218bcb0] [d0000000185d0e68] configfs_write_file+0xd0/0x190 [configfs]
[84010.597072] [c000000b5218bd00] [c0000000003d0edc] __vfs_write+0x3c/0x1e0
[84010.597074] [c000000b5218bd90] [c0000000003d2ea8] vfs_write+0xd8/0x220
[84010.597076] [c000000b5218bde0] [c0000000003d4ddc] SyS_write+0x6c/0x110
[84010.597079] [c000000b5218be30] [c00000000000b188] system_call+0x3c/0x130
[84010.597080] Instruction dump:
[84010.597082] 7d0050a8 7d084b78 7d0051ad 40c2fff4 7fa3eb78 4bf73965 60000000 7fa3eb78
[84010.597086] 4bf6dcd9 60000000 2fa30000 419eff40 <0fe00000> 4bffff38 e95f0058 a12a0180
[84010.597090] ---[ end trace e32abaf6e6fee826 ]---

To reproduce:

echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging
modprobe target_core_mod
modprobe tcm_qla2xxx
mkdir /sys/kernel/config/target/qla2xxx
mkdir /sys/kernel/config/target/qla2xxx/<port-name>
mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable
echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable

SYSTEM START
kernel: pid 327:drivers/scsi/qla2xxx/qla_init.c:2174 qla2x00_initialize_adapter(): vha->flags.online 0x0
<...>
kernel: pid 327:drivers/scsi/qla2xxx/qla_os.c:3444 qla2x00_probe_one(): vha->flags.online 0x1

echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0
<...>
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6998 qla2x00_restart_isp(): vha->flags.online 0x0

echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0
<...>
kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0

echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable
kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0
kernel: -----------[ cut here ]-----------
kernel: WARNING: CPU: 1 PID: 1404 at drivers/scsi/qla2xxx/qla_target.c:6654 qlt_enable_vha+0x1e0/0x280 [qla2xxx]

The issue happens because no real ISP reset is executed.  The
qla2x00_abort_isp(scsi_qla_host_t *vha) function expects that
vha->flags.online will be not zero for ISP reset procedure.  This patch
sets vha->flags.online to 1 before calling ->abort_isp() for starting the
ISP reset.

Link: https://lore.kernel.org/r/1d7b21bf9f7676643239eb3d60eaca7cfa505cf0.camel@yadro.com


Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Viacheslav Dubeyko <v.dubeiko@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Leftover from cmd_list removal.

Link: https://lore.kernel.org/r/20200507062642.100612-1-hare@suse.de


Fixes: c5a97076 ("scsi: core: Remove cmd_list functionality")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Allowing a non-power-of-2 zone size forces the use of direct division
operations of 64-bit sector values to obtain a zone number or number of
zones. Doing so without using do_div() leads to compilation errors on
32-bit architectures.

Devices with a zone size that is not a power of 2 do not exist today so
allowing their emulation is of limited interest as the sd driver will not
support them anyway. To fix this compilation error, instead of using
do_div() for sector values divisions, simply disallow zone size values that
are not a power of 2.

[mkp: commit desc]

Link: https://lore.kernel.org/r/20200507023526.221574-1-damien.lemoal@wdc.com


Fixes: 98e0a689 ("scsi: scsi_debug: Add zone_size_mb module parameter")
Fixes: f0d1cf93 ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Implement ZBC host-aware device model emulation. The main changes from the
host-managed emulation are the device type (TYPE_DISK is used), relaxation
of access checks for read and write operations and different handling of a
sequential write preferred zone write pointer as mandated by the ZBC r05
specifications.

To facilitate the implementation and avoid a lot of "if" statement, the
zmodel field is added to the device information and the z_type field to the
zone state data structure.

Link: https://lore.kernel.org/r/20200422104221.378203-8-damien.lemoal@wdc.com


Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add the zone_size_mb module parameters to control the zone size of a ZBC
device. If the zone size specified is not a divisor of the device capacity,
the last zone of the device will be created as a smaller "runt" zone. This
parameter is ignored for device types other than 0x14 (zbc=2 case).

Note: for testing purposes, zone sizes that are not a power of 2 are
accepted but will result in the drive being rejected by the sd driver.

Link: https://lore.kernel.org/r/20200422104221.378203-7-damien.lemoal@wdc.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Allow controlling the number of conventional zones of a ZBC device with the
new zone_nr_conv module parameter. The default value is 1 and the specified
value must be less than the total number of zones of the device. This
parameter is ignored for device types other than 0x14 (zbc=2 case).

Link: https://lore.kernel.org/r/20200422104221.378203-6-damien.lemoal@wdc.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add the zone_max_open module parameters to control the maximum number of
open zones of a ZBC device. This parameter is ignored for device types
other than 0x14 (zbc=2 case).

Link: https://lore.kernel.org/r/20200422104221.378203-5-damien.lemoal@wdc.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add the zbc module parameter to take either:
    0: none         (probably a conventional disk)
    1: host-aware
    2: host-managed

These values are chosen to match 'enum blk_zoned_model' found in
include/linux/blkdev.h . Instead of "none", "no" or "0" can be given.
Instead of "host-aware", "aware or "1" can be given. Instead of
"host-managed", "managed" or "2" can be given.

Note: the zbc parameter can only be given at driver/module load time; it
cannot be changed via sysfs thereafter.

At this time there is no ZBC "host-aware" implementation so that string (or
the value '1') results in a modprobe error.

Link: https://lore.kernel.org/r/20200422104221.378203-4-damien.lemoal@wdc.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add support for the 5 ZBC commands and enough functionality to emulate a
host-managed device with one conventional zone and a set of sequential
write-required zones up to the disk capacity.

Link: https://lore.kernel.org/r/20200422104221.378203-3-damien.lemoal@wdc.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The ZBC standard "piggy-backs" on many, but not all, of the facilities in
SBC. Add those ZBC mode pages (plus mode parameter block descriptors
(e.g. "WP")) and VPD pages in common with SBC. Add ZBC specific VPD page
for the host-managed ZBC device type (ptype=0x14).

Link: https://lore.kernel.org/r/20200422104221.378203-2-damien.lemoal@wdc.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The scsi_debug driver version is visible in:

   /sys/modules/scsi_debug/version

and can thus be used by user space programs to alter the features they try
to use. Since the per_host_store and zbc/zone options are significant
additions, bump the version number to 1.89 .

Link: https://lore.kernel.org/r/20200421151424.32668-9-dgilbert@interlog.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This module has a lot of parameters and when searching for one, the author
prefers them in alphabetical order. This can lead to somewhat illogical
ordering (e.g. inq_product before inq_vendor). However it is not clear what
another sensible total logical ordering would be.

Link: https://lore.kernel.org/r/20200421151424.32668-8-dgilbert@interlog.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Many disks implement the SCSI PRE-FETCH commands. One use case might be a
disk-to-disk compare, say between disks A and B. Then this sequence of
commands might be used: PRE-FETCH(from B, IMMED), READ(from A), VERIFY
(BYTCHK=1 on B with data returned from READ).  The PRE-FETCH (which returns
quickly due to the IMMED) fetches the data from the media into B's cache
which should speed the trailing VERIFY command. The next chunk of the
compare might be done in parallel, with A and B reversed.

The implementation tries to bring the specified range in main memory into
the cache(s) associated with this machine's CPU(s) using the
prefetch_range() function.

Link: https://lore.kernel.org/r/20200421151424.32668-7-dgilbert@interlog.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Previously the code did the work implied by the given SCSI command and
after that it waited for a timer based on the user specified command
duration to be exhausted before informing the mid-level that the command
was complete. For short command durations, the time to complete the work
implied by the SCSI command could be significant compared to the user
specified command duration.

For example a WRITE of 128 blocks (say 512 bytes each) on a machine that
can copy from main memory to main memory at a rate of 10 GB/sec will take
around 6.4 microseconds to do that copy.  If the user specified a command
duration of 5 microseconds (ndelay=5000), should the driver do a further
delay of 5 microseconds after the copy or return immediately because 6.4 >
5 ?

The action prior to this patch was to always do the timer based
delay. After this patch, for ndelay values less than 1 millisecond, this
driver will complete the command immediately.  And in the case where the
user specified delay was 7 microseconds, a timer delay of 600 nanoseconds
will be set ((7 - 6.4) * 1000).

Link: https://lore.kernel.org/r/20200421151424.32668-6-dgilbert@interlog.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The design of this driver is to do any ramdisk access on the same thread
that invoked the queuecommand() call. That is assumed to be user space
context. The command duration is implemented by setting the delay with a
high resolution timer. The hr timer's callback may well be in interrupt
context, but it doesn't touch the ramdisk. So try removing the
_irqsave()/_irqrestore() portion on the read-write lock that protects
ramdisk access.

Link: https://lore.kernel.org/r/20200421151424.32668-5-dgilbert@interlog.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

With the addition of the per_host_store option, the ability to check
whether two different ramdisk images are the same or not becomes
practical. Prior to this patch VERIFY(10) always returned true (i.e.  the
SCSI GOOD status) without checking. This option adds support for BYTCHK
equal to 0, 1 and 3. If the comparison fails, then a sense key of
MISCOMPARE is returned as per the T10 standards. Also add support for the
VERIFY(16) command.

Link: https://lore.kernel.org/r/20200421151424.32668-4-dgilbert@interlog.com


Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The scsi_debug driver has always been restricted to using one ramdisk image
(or none) for its storage. This means that thousands of scsi_debug devices
can be created without exhausting the host machine's RAM. The downside is
that all scsi_debug devices share the same ramdisk image. This option
changes the way a following write to the add_host parameter (or an add_host
in the module/driver invocation) operates.  For each new host that is
created while per_host_store is true, a new store (of dev-size_mb MiB) is
created and associated with all the LUs that belong to that new host. The
user (who will need root permissions) needs to take care not to exhaust all
the machine's available RAM.

One reason for doing this is to check that (partial) disk to disk copies
based on scsi_debug devices have actually copied accurately. To test this
the add_host=<n> parameter where <n> is 2 or greater can be used when the
scsi_debug module is loaded. Let us assume that /dev/sdb and /dev/sg1 are
the same scsi_debug device, while /dev/sdc and /dev/sg2 are the same
scsi_debug device. With per_host_store=1 add_host=2 they will have
different ramdisk images. Then the following pseudocode could be executed
to check if the sgh_dd copy worked:

    dd if=/dev/urandom of=/dev/sdb
    sgh_dd if=/dev/sg1 of=/dev/sg2 [plus option(s) to test]
    cmp /dev/sdb /dev/sdc

If the cmp fails then the copy has failed (or some other mechanism wrote to
/dev/sdb or /dev/sdc in the interim).

[mkp: use kstrtobool()]

Link: https://lore.kernel.org/r/20200421151424.32668-3-dgilbert@interlog.com


Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add a new command line option (e.g. random=1) and sysfs attribute that
causes subsequent command completion times to be between the current
command delay setting and 0. A uniformly distributed 32 bit, kernel
provided integer is used for this purpose.

Since the existing 'delay' whose units are jiffies (typically milliseconds)
and 'ndelay' (units: nanoseconds) options (and sysfs attributes) span a
range greater than 32 bits, some scaling is required.

The purpose of this patch is to widen the range of testing cases that are
visited in long running tests. Put simply: rarely struct race conditions
are more likely to be found when this facility is used.

The default is the previous case in which all command completions were
roughly equal to (if not, slightly longer) than the value given by the
'delay' or 'ndelay' settings (or their defaults).  This option's default is
equivalent to setting 'random=0' .

[mkp: use kstrtobool()]

Link: https://lore.kernel.org/r/20200421151424.32668-2-dgilbert@interlog.com


Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The channel index is represented by an unsigned variable 'u32 chan'. We
don't need to check whether it is less than zero, the 'chan < 0' statement
is always false. Remove it.

Link: https://lore.kernel.org/r/1588162218-61757-1-git-send-email-wangxiongfeng2@huawei.com


Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Smatch complains that the "path_data->handle" variable is user controlled.
It comes from iscsi_set_path() so that seems possible.  It's harmless to
add a limit check.

The qedi->ep_tbl[] array has qedi->max_active_conns elements (which is
always ISCSI_MAX_SESS_PER_HBA (4096) elements).  The array is allocated in
the qedi_cm_alloc_mem() function.

Link: https://lore.kernel.org/r/20200428131939.GA696531@mwanda


Fixes: ace7f46b ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The bitfields mpi_fw_dump_reading and mpi_fw_dumped are currently signed
which is not recommended as the representation is an implementation defined
behaviour.  Fix this by making the bit-fields unsigned ints.

Link: https://lore.kernel.org/r/20200428102013.1040598-1-colin.king@canonical.com


Fixes: cbb01c2f ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In case scsi_setup_fs_cmnd() fails we're not freeing the sgtables allocated
by scsi_init_io(), thus we leak the allocated memory.

Free the sgtables allocated by scsi_init_io() in case scsi_setup_fs_cmnd()
fails.

Technically scsi_setup_scsi_cmnd() does not suffer from this problem as it
can only fail if scsi_init_io() fails, so it does not have sgtables
allocated. But to maintain symmetry and as a measure of defensive
programming, free the sgtables on scsi_setup_scsi_cmnd() failure as well.
scsi_mq_free_sgtables() has safeguards against double-freeing of memory so
this is safe to do.

While we're at it, rename scsi_mq_free_sgtables() to scsi_free_sgtables().

Link: https://bugzilla.kernel.org/show_bug.cgi?id=205595
Link: https://lore.kernel.org/r/20200428104605.8143-2-johannes.thumshirn@wdc.com


Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Despite of functions being documented, they are not in the kernel-doc
specification, and could not be included in kernel documentation. Change
the style of functions comments to be compliant to the kernel-doc style.
When the function comments are outdated, update then.

[mkp: a few edits]

Link: https://lore.kernel.org/r/20200419050148.33371-1-andrealmeid@collabora.com


Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>