Merge tag 'hwmon-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - SB-TSI sensors
   - Lineat Technology LTC2992
   - Delta power supplies Q54SJ108A2
   - Maxim MAX127
   - Corsair PSU
   - STMicroelectronics PM6764 Voltage Regulator

  New chip support:
   - P10 added to fsi/occ driver
   - NCT6687D added to nct6883 driver
   - Intel-based Xserves added to applesmc driver
   - AMD family 19h model 01h added to amd_energy driver

  And various minor bug fixes and improvements"

* tag 'hwmon-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits)
  dt-bindings: (hwmon/sbtsi_temp) Add SB-TSI hwmon driver bindings
  hwmon: (sbtsi) Add documentation
  hwmon: (sbtsi) Add basic support for SB-TSI sensors
  hwmon: (iio_hwmon) Drop bogus __refdata annotation
  hwmon: (xgene) Drop bogus __refdata annotation
  dt-bindings: hwmon: convert AD ADM1275 bindings to dt-schema
  hwmon: (occ) Add new temperature sensor type
  fsi: occ: Add support for P10
  dt-bindings: fsi: Add P10 OCC device documentation
  dt-bindings: hwmon: convert TI ADS7828 bindings to dt-schema
  dt-bindings: hwmon: convert AD AD741x bindings to dt-schema
  dt-bindings: hwmon: convert TI INA2xx bindings to dt-schema
  hwmon: (ltc2992) Fix less than zero comparisons with an unsigned integer
  hwmon: (pmbus/q54sj108a2) Correct title underline length
  dt-bindings: hwmon: Add documentation for ltc2992
  hwmon: (ltc2992) Add support for GPIOs.
  hwmon: (ltc2992) Add support
  hwmon: (pmbus) Driver for Delta power supplies Q54SJ108A2
  hwmon: Add driver for STMicroelectronics PM6764 Voltage Regulator
  hwmon: (nct6683) Support NCT6687D.
  ...

Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt

-Device-tree bindings for FSI-attached POWER9 On-Chip Controller (OCC)
----------------------------------------------------------------------
+Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC)
+-----------------------------------------------------------------------------
 
-This is the binding for the P9 On-Chip Controller accessed over FSI from a
-service processor. See fsi.txt for details on bindings for FSI slave and CFAM
+This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from
+a service processor. See fsi.txt for details on bindings for FSI slave and CFAM
 nodes. The OCC is not an FSI slave device itself, rather it is accessed
-through the SBE fifo.
+through the SBE FIFO.
 
 Required properties:
- - compatible = "ibm,p9-occ"
+ - compatible = "ibm,p9-occ" or "ibm,p10-occ"
 
 Examples:
 

Documentation/devicetree/bindings/hwmon/ad741x.txt

-* AD7416/AD7417/AD7418 Temperature Sensor Device Tree Bindings
-
-Required properties:
-- compatible: one of
-		"adi,ad7416"
-		"adi,ad7417"
-		"adi,ad7418"
-- reg: I2C address
-
-Example:
-
-hwmon@28 {
-	compatible = "adi,ad7418";
-	reg = <0x28>;
-};

Documentation/devicetree/bindings/hwmon/adi,ad741x.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,ad741x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices AD7416/AD7417/AD7418 temperature sensors
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7416
+      - adi,ad7417
+      - adi,ad7418
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        temperature-sensor@28 {
+            compatible = "adi,ad7418";
+            reg = <0x28>;
+        };
+    };

Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/adi,adm1275.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADM1075/ADM127x/ADM129x digital power monitors
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The ADM1293 and ADM1294 are high accuracy integrated digital power monitors
+  that offer digital current, voltage, and power monitoring using an on-chip,
+  12-bit analog-to-digital converter (ADC), communicated through a PMBus
+  compliant I2C interface.
+
+  Datasheets:
+    https://www.analog.com/en/products/adm1294.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adm1075
+      - adi,adm1272
+      - adi,adm1275
+      - adi,adm1276
+      - adi,adm1278
+      - adi,adm1293
+      - adi,adm1294
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor-micro-ohms:
+    description:
+      Shunt resistor value in micro-Ohm.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-sensor@10 {
+            compatible = "adi,adm1272";
+            reg = <0x10>;
+            shunt-resistor-micro-ohms = <500>;
+        };
+    };

Documentation/devicetree/bindings/hwmon/adi,ltc2992.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/adi,ltc2992.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology 2992 Power Monitor
+
+maintainers:
+  - Alexandru Tachici <alexandru.tachici@analog.com>
+
+description: |
+  Linear Technology 2992 Dual Wide Range Power Monitor
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2992.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ltc2992
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  avcc-supply: true
+
+patternProperties:
+  "^channel@([0-1])$":
+    type: object
+    description: |
+      Represents the two supplies to be monitored.
+
+    properties:
+      reg:
+        description: |
+          The channel number. LTC2992 can monitor two supplies.
+        items:
+          minimum: 0
+          maximum: 1
+
+      shunt-resistor-micro-ohms:
+        description:
+          The value of curent sense resistor in microohms.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ltc2992@6F {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                compatible = "adi,ltc2992";
+                reg = <0x6F>;
+
+                channel@0 {
+                        reg = <0x0>;
+                        shunt-resistor-micro-ohms = <10000>;
+                };
+
+                channel@1 {
+                        reg = <0x1>;
+                        shunt-resistor-micro-ohms = <10000>;
+                };
+        };
+    };
+...

Documentation/devicetree/bindings/hwmon/adm1275.txt

-adm1275 properties
-
-Required properties:
-- compatible: Must be one of the supported compatible strings:
-	- "adi,adm1075" for adm1075
-	- "adi,adm1272" for adm1272
-	- "adi,adm1275" for adm1275
-	- "adi,adm1276" for adm1276
-	- "adi,adm1278" for adm1278
-	- "adi,adm1293" for adm1293
-	- "adi,adm1294" for adm1294
-- reg: I2C address
-
-Optional properties:
-
-- shunt-resistor-micro-ohms
-	Shunt resistor value in micro-Ohm
-
-Example:
-
-adm1272@10 {
-	compatible = "adi,adm1272";
-	reg = <0x10>;
-	shunt-resistor-micro-ohms = <500>;
-};

Documentation/devicetree/bindings/hwmon/ads7828.txt

-ads7828 properties
-
-Required properties:
-- compatible: Should be one of
-	       ti,ads7828
-	       ti,ads7830
-- reg: I2C address
-
-Optional properties:
-
-- ti,differential-input
-  Set to use the device in differential mode.
-- vref-supply
-  The external reference on the device is set to this regulators output. If it
-  does not exists the internal reference will be used and output by the ads78xx
-  on the "external vref" pin.
-
-  Example ADS7828 node:
-
-  ads7828: ads@48 {
-	   comatible = "ti,ads7828";
-	   reg = <0x48>;
-	   vref-supply = <&vref>;
-	   ti,differential-input;
-  };

Documentation/devicetree/bindings/hwmon/amd,sbtsi.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/amd,sbtsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: >
+  Sideband interface Temperature Sensor Interface (SB-TSI) compliant
+  AMD SoC temperature device
+
+maintainers:
+  - Kun Yi <kunyi@google.com>
+  - Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+
+description: |
+  SB Temperature Sensor Interface (SB-TSI) is an SMBus compatible
+  interface that reports AMD SoC's Ttcl (normalized temperature),
+  and resembles a typical 8-pin remote temperature sensor's I2C interface
+  to BMC. The emulated thermal sensor can report temperatures in increments
+  of 0.125 degrees, ranging from 0 to 255.875.
+
+properties:
+  compatible:
+    enum:
+      - amd,sbtsi
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C bus address of the device as specified in Section 6.3.1 of the
+      SoC register reference. The SB-TSI address is normally 98h for socket
+      0 and 90h for socket 1, but it could vary based on hardware address
+      select pins.
+      \[open source SoC register reference\]
+        https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sbtsi@4c {
+                compatible = "amd,sbtsi";
+                reg = <0x4c>;
+        };
+    };
+...

Documentation/devicetree/bindings/hwmon/ina2xx.txt

-ina2xx properties
-
-Required properties:
-- compatible: Must be one of the following:
-	- "ti,ina209" for ina209
-	- "ti,ina219" for ina219
-	- "ti,ina220" for ina220
-	- "ti,ina226" for ina226
-	- "ti,ina230" for ina230
-	- "ti,ina231" for ina231
-- reg: I2C address
-
-Optional properties:
-
-- shunt-resistor
-	Shunt resistor value in micro-Ohm
-
-Example:
-
-ina220@44 {
-	compatible = "ti,ina220";
-	reg = <0x44>;
-	shunt-resistor = <1000>;
-};

Documentation/devicetree/bindings/hwmon/pwm-fan.txt

@@ -8,15 +8,16 @@ Required properties:
 
 Optional properties:
 - fan-supply		: phandle to the regulator that provides power to the fan
-- interrupts		: This contains a single interrupt specifier which
-			  describes the tachometer output of the fan as an
-			  interrupt source. The output signal must generate a
-			  defined number of interrupts per fan revolution, which
-			  require that it must be self resetting edge interrupts.
-			  See interrupt-controller/interrupts.txt for the format.
-- pulses-per-revolution : define the tachometer pulses per fan revolution as
-			  an integer (default is 2 interrupts per revolution).
-			  The value must be greater than zero.
+- interrupts		: This contains an interrupt specifier for each fan
+			  tachometer output connected to an interrupt source.
+			  The output signal must generate a defined number of
+			  interrupts per fan revolution, which require that
+			  it must be self resetting edge interrupts. See
+			  interrupt-controller/interrupts.txt for the format.
+- pulses-per-revolution : define the number of pulses per fan revolution for
+			  each tachometer input as an integer (default is 2
+			  interrupts per revolution). The value must be
+			  greater than zero.
 
 Example:
 	fan0: pwm-fan {
@@ -55,3 +56,12 @@ Example 2:
 		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 		pulses-per-revolution = <2>;
 	};
+
+Example 3:
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm1 0 25000 0>;
+		interrupts-extended = <&gpio1 1 IRQ_TYPE_EDGE_FALLING>,
+			<&gpio2 5 IRQ_TYPE_EDGE_FALLING>;
+		pulses-per-revolution = <2>, <1>;
+	};

Documentation/devicetree/bindings/hwmon/ti,ads7828.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,ads7828.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments ADS7828/ADS7830 Analog to Digital Converter (ADC)
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The ADS7828 is 12-Bit, 8-Channel Sampling Analog to Digital Converter (ADC)
+  with an I2C interface.
+
+  Datasheets:
+    https://www.ti.com/product/ADS7828
+
+properties:
+  compatible:
+    enum:
+      - ti,ads7828
+      - ti,ads7830
+
+  reg:
+    maxItems: 1
+
+  ti,differential-input:
+    description:
+      Set to use the device in differential mode.
+    type: boolean
+
+  vref-supply:
+    description:
+      The regulator to use as an external reference. If it does not exists the
+      internal reference will be used.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        adc@48 {
+            comatible = "ti,ads7828";
+            reg = <0x48>;
+            vref-supply = <&vref>;
+            ti,differential-input;
+        };
+    };

Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml

+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/ti,ina2xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments INA209 family of power/voltage monitors
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+  The INA209 is a high-side current shunt and power monitor with
+  an I2C interface.
+
+  Datasheets:
+    https://www.ti.com/product/INA209
+
+properties:
+  compatible:
+    enum:
+      - ti,ina209
+      - ti,ina219
+      - ti,ina220
+      - ti,ina226
+      - ti,ina230
+      - ti,ina231
+
+  reg:
+    maxItems: 1
+
+  shunt-resistor:
+    description:
+      Shunt resistor value in micro-Ohm.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        power-sensor@44 {
+            compatible = "ti,ina220";
+            reg = <0x44>;
+            shunt-resistor = <1000>;
+        };
+    };

Documentation/devicetree/bindings/trivial-devices.yaml

@@ -254,10 +254,6 @@ properties:
           - st,24c256
             # Ambient Light Sensor with SMBUS/Two Wire Serial Interface
           - taos,tsl2550
-            # 8-Channels, 12-bit ADC
-          - ti,ads7828
-            # 8-Channels, 8-bit ADC
-          - ti,ads7830
             # Temperature Monitoring and Fan Control
           - ti,amc6821
             # Temperature and humidity sensor with i2c interface

Documentation/hwmon/adm1275.rst

@@ -83,7 +83,7 @@ or current scaling. Reported voltages, currents, and power are raw measurements,
 and will typically have to be scaled.
 
 The shunt value in micro-ohms can be set via device tree at compile-time. Please
-refer to the Documentation/devicetree/bindings/hwmon/adm1275.txt for bindings
+refer to the Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml for bindings
 if the device tree is used.
 
 Platform data support

Documentation/hwmon/amd_energy.rst

@@ -5,7 +5,9 @@ Kernel driver amd_energy
 
 Supported chips:
 
-* AMD Family 17h Processors
+* AMD Family 17h Processors: Model 30h
+
+* AMD Family 19h Processors: Model 01h
 
   Prefix: 'amd_energy'
 
@@ -112,3 +114,6 @@ energy[N]_input EcoreX	  Core Energy   X = [0] to [nr_cpus - 1]
 energy[N]_input EsocketX  Socket Energy X = [0] to [nr_socks -1]
 			  Measured input socket energy
 =============== ========  ======================================
+
+Note: To address CVE-2020-12912, the visibility of the energy[N]_input
+attributes is restricted to owner and groups only.

Documentation/hwmon/corsair-psu.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver corsair-psu
+=========================
+
+Supported devices:
+
+* Corsair Power Supplies
+
+  Corsair HX550i
+
+  Corsair HX650i
+
+  Corsair HX750i
+
+  Corsair HX850i
+
+  Corsair HX1000i
+
+  Corsair HX1200i
+
+  Corsair RM550i
+
+  Corsair RM650i
+
+  Corsair RM750i
+
+  Corsair RM850i
+
+  Corsair RM1000i
+
+Author: Wilken Gottwalt
+
+Description
+-----------
+
+This driver implements the sysfs interface for the Corsair PSUs with a HID protocol
+interface of the HXi and RMi series.
+These power supplies provide access to a micro-controller with 2 attached
+temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for
+power usage and 4 sensors for current levels and addtional non-sensor information
+like uptimes.
+
+Sysfs entries
+-------------
+
+=======================	========================================================
+curr1_input		Total current usage
+curr2_input		Current on the 12v psu rail
+curr3_input		Current on the 5v psu rail
+curr4_input		Current on the 3.3v psu rail
+fan1_input		RPM of psu fan
+in0_input		Voltage of the psu ac input
+in1_input		Voltage of the 12v psu rail
+in2_input		Voltage of the 5v psu rail
+in3_input		Voltage of the 3.3 psu rail
+power1_input		Total power usage
+power2_input		Power usage of the 12v psu rail
+power3_input		Power usage of the 5v psu rail
+power4_input		Power usage of the 3.3v psu rail
+temp1_input		Temperature of the psu vrm component
+temp2_input		Temperature of the psu case
+=======================	========================================================
+
+Usage Notes
+-----------
+
+It is an USB HID device, so it is auto-detected and supports hot-swapping.
+
+Flickering values in the rail voltage levels can be an indicator for a failing
+PSU. The driver also provides some additional useful values via debugfs, which
+do not fit into the hwmon class.
+
+Debugfs entries
+---------------
+
+=======================	========================================================
+uptime			Current uptime of the psu
+uptime_total		Total uptime of the psu
+vendor			Vendor name of the psu
+product			Product name of the psu
+=======================	========================================================

Documentation/hwmon/index.rst

@@ -49,6 +49,7 @@ Hardware Monitoring Kernel Drivers
    bt1-pvt
    coretemp
    corsair-cpro
+   corsair-psu
    da9052
    da9055
    dell-smm-hwmon
@@ -100,6 +101,7 @@ Hardware Monitoring Kernel Drivers
    lm95234
    lm95245
    lochnagar
+   ltc2992
    ltc2945
    ltc2947
    ltc2978
@@ -110,6 +112,7 @@ Hardware Monitoring Kernel Drivers
    ltc4245
    ltc4260
    ltc4261
+   max127
    max16064
    max16065
    max1619
@@ -144,11 +147,14 @@ Hardware Monitoring Kernel Drivers
    pc87360
    pc87427
    pcf8591
+   pm6764tr
    pmbus
    powr1220
    pxe1610
    pwm-fan
+   q54sj108a2
    raspberrypi-hwmon
+   sbtsi_temp
    sch5627
    sch5636
    scpi-hwmon

Documentation/hwmon/ltc2992.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver ltc2992
+=====================
+
+Supported chips:
+  * Linear Technology LTC2992
+    Prefix: 'ltc2992'
+    Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2992.pdf
+
+Author: Alexandru Tachici <alexandru.tachici@analog.com>
+
+
+Description
+-----------
+
+This driver supports hardware monitoring for Linear Technology LTC2992 power monitor.
+
+LTC2992 is a rail-to-rail system monitor that measures current,
+voltage, and power of two supplies.
+
+Two ADCs simultaneously measure each supply’s current. A third ADC monitors
+the input voltages and four auxiliary external voltages.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write,
+all other attributes are read-only.
+
+in_reset_history	Reset all highest/lowest values.
+
+inX_input		Measured voltage.
+inX_lowest		Minimum measured voltage.
+inX_highest		Maximum measured voltage.
+inX_min			Minimum voltage allowed.
+inX_max			Maximum voltage allowed.
+inX_min_alarm		An undervoltage occurred. Cleared on read.
+inX_max_alarm		An overvoltage occurred. Cleared on read.
+
+currX_input		Measured current.
+currX_lowest		Minimum measured current.
+currX_highest		Maximum measured current.
+currX_min		Minimum current allowed.
+currX_max		Maximum current allowed.
+currX_min_alarm		An undercurrent occurred. Cleared on read.
+currX_max_alarm		An overcurrent occurred. Cleared on read.
+
+powerX_input		Measured power.
+powerX_input_lowest	Minimum measured voltage.
+powerX_input_highest	Maximum measured voltage.
+powerX_min		Minimum power.
+powerX_max		Maximum power.
+powerX_min_alarm	An underpower occurred. Cleared on read.
+powerX_max_alarm	An overpower occurred. Cleared on read.

Documentation/hwmon/max127.rst

+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver max127
+====================
+
+Author:
+
+  * Tao Ren <rentao.bupt@gmail.com>
+
+Supported chips:
+
+  * Maxim MAX127
+
+    Prefix: 'max127'
+
+    Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX127-MAX128.pdf
+
+Description
+-----------
+
+The MAX127 is a multirange, 12-bit data acquisition system (DAS) providing
+8 analog input channels that are independently software programmable for
+a variety of ranges. The available ranges are {0,5V}, {0,10V}, {-5,5V}
+and {-10,10V}.
+
+The MAX127 features a 2-wire, I2C-compatible serial interface that allows
+communication among multiple devices using SDA and SCL lines.
+
+Sysfs interface
+---------------
+
+  ============== ==============================================================
+  in[0-7]_input  The input voltage (in mV) of the corresponding channel.
+		 RO
+
+  in[0-7]_min    The lower input limit (in mV) for the corresponding channel.
+		 ADC range and LSB will be updated when the limit is changed.
+		 For the MAX127, it will be adjusted to -10000, -5000, or 0.
+		 RW
+
+  in[0-7]_max    The higher input limit (in mV) for the corresponding channel.
+		 ADC range and LSB will be updated when the limit is changed.
+		 For the MAX127, it will be adjusted to 0, 5000, or 10000.
+		 RW
+  ============== ==============================================================

Documentation/hwmon/nct6683.rst

@@ -3,7 +3,7 @@ Kernel driver nct6683
 
 Supported chips:
 
-  * Nuvoton NCT6683D
+  * Nuvoton NCT6683D/NCT6687D
 
     Prefix: 'nct6683'
 
@@ -61,4 +61,5 @@ Board		Firmware version
 Intel DH87RL	NCT6683D EC firmware version 1.0 build 04/03/13
 Intel DH87MC	NCT6683D EC firmware version 1.0 build 04/03/13
 Intel DB85FL	NCT6683D EC firmware version 1.0 build 04/03/13
+MSI B550	NCT6687D EC firmware version 1.0 build 05/07/20
 =============== ===============================================