Merge tag 'mvebu-fixes-5.0-2' of git://git.infradead.org/linux-mvebu into arm/fixes

mvebu fixes for 5.0 (part 2)

Fix PHY reset signal on clearfog gt 8K (Armada 8040 based)
Fix NAND description on Armada XP boards which was broken since a few
release

* tag 'mvebu-fixes-5.0-2' of git://git.infradead.org/linux-mvebu

:
  arm64: dts: clearfog-gt-8k: fix SGMII PHY reset signal
  ARM: dts: armada-xp: fix Armada XP boards NAND description

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/armada-xp-db.dts

@@ -144,30 +144,32 @@
 				status = "okay";
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x800000>;
-					};
-					partition@800000 {
-						label = "Linux";
-						reg = <0x800000 0x800000>;
-					};
-					partition@1000000 {
-						label = "Filesystem";
-						reg = <0x1000000 0x3f000000>;
 
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "U-Boot";
+							reg = <0 0x800000>;
+						};
+						partition@800000 {
+							label = "Linux";
+							reg = <0x800000 0x800000>;
+						};
+						partition@1000000 {
+							label = "Filesystem";
+							reg = <0x1000000 0x3f000000>;
+						};
 					};
 				};
 			};

arch/arm/boot/dts/armada-xp-gp.dts

@@ -160,12 +160,15 @@
 				status = "okay";
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+				};
 			};
 		};
 

arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts

@@ -81,49 +81,52 @@
 
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "u-boot";
-						reg = <0x00000000 0x000e0000>;
-						read-only;
-					};
-
-					partition@e0000 {
-						label = "u-boot-env";
-						reg = <0x000e0000 0x00020000>;
-						read-only;
-					};
-
-					partition@100000 {
-						label = "u-boot-env2";
-						reg = <0x00100000 0x00020000>;
-						read-only;
-					};
-
-					partition@120000 {
-						label = "zImage";
-						reg = <0x00120000 0x00400000>;
-					};
-
-					partition@520000 {
-						label = "initrd";
-						reg = <0x00520000 0x00400000>;
-					};
 
-					partition@e00000 {
-						label = "boot";
-						reg = <0x00e00000 0x3f200000>;
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x000e0000>;
+							read-only;
+						};
+
+						partition@e0000 {
+							label = "u-boot-env";
+							reg = <0x000e0000 0x00020000>;
+							read-only;
+						};
+
+						partition@100000 {
+							label = "u-boot-env2";
+							reg = <0x00100000 0x00020000>;
+							read-only;
+						};
+
+						partition@120000 {
+							label = "zImage";
+							reg = <0x00120000 0x00400000>;
+						};
+
+						partition@520000 {
+							label = "initrd";
+							reg = <0x00520000 0x00400000>;
+						};
+
+						partition@e00000 {
+							label = "boot";
+							reg = <0x00e00000 0x3f200000>;
+						};
 					};
 				};
 			};

arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts

@@ -351,7 +351,7 @@
 		reg = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
-		reset-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <10000>;
 	};