Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:

 - Consolidation of softirq pending:

   The softirq mask and its accessors/mutators have many implementations
   scattered around many architectures. Most do the same things
   consisting in a field in a per-cpu struct (often irq_cpustat_t)
   accessed through per-cpu ops. We can provide instead a generic
   efficient version that most of them can use. In fact s390 is the only
   exception because the field is stored in lowcore.

 - Support for level!?! triggered MSI (ARM)

   Over the past couple of years, we've seen some SoCs coming up with
   ways of signalling level interrupts using a new flavor of MSIs, where
   the MSI controller uses two distinct messages: one that raises a
   virtual line, and one that lowers it. The target MSI controller is in
   charge of maintaining the state of the line.

   This allows for a much simplified HW signal routing (no need to have
   hundreds of discrete lines to signal level interrupts if you already
   have a memory bus), but results in a departure from the current idea
   the kernel has of MSIs.

 - Support for Meson-AXG GPIO irqchip

 - Large stm32 irqchip rework (suspend/resume, hierarchical domains)

 - More SPDX conversions

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  ARM: dts: stm32: Add exti support to stm32mp157 pinctrl
  ARM: dts: stm32: Add exti support for stm32mp157c
  pinctrl/stm32: Add irq_eoi for stm32gpio irqchip
  irqchip/stm32: Add suspend/resume support for hierarchy domain
  irqchip/stm32: Add stm32mp1 support with hierarchy domain
  irqchip/stm32: Prepare common functions
  irqchip/stm32: Add host and driver data structures
  irqchip/stm32: Add suspend support
  irqchip/stm32: Add falling pending register support
  irqchip/stm32: Checkpatch fix
  irqchip/stm32: Optimizes and cleans up stm32-exti irq_domain
  irqchip/meson-gpio: Add support for Meson-AXG SoCs
  dt-bindings: interrupt-controller: New binding for Meson-AXG SoC
  dt-bindings: interrupt-controller: Fix the double quotes
  softirq/s390: Move default mutators of overwritten softirq mask to s390
  softirq/x86: Switch to generic local_softirq_pending() implementation
  softirq/sparc: Switch to generic local_softirq_pending() implementation
  softirq/powerpc: Switch to generic local_softirq_pending() implementation
  softirq/parisc: Switch to generic local_softirq_pending() implementation
  softirq/ia64: Switch to generic local_softirq_pending() implementation
  ...

Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt

@@ -9,11 +9,12 @@ number of interrupt exposed depends on the SoC.
 
 Required properties:
 
-- compatible : must have "amlogic,meson8-gpio-intc” and either
-   “amlogic,meson8-gpio-intc” for meson8 SoCs (S802) or
-   “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or
-   “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) or
-   “amlogic,meson-gxl-gpio-intc” for GXL SoCs (S905X, S912)
+- compatible : must have "amlogic,meson8-gpio-intc" and either
+    "amlogic,meson8-gpio-intc" for meson8 SoCs (S802) or
+    "amlogic,meson8b-gpio-intc" for meson8b SoCs (S805) or
+    "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
+    "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
+    "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
 - interrupt-parent : a phandle to the GIC the interrupts are routed to.
    Usually this is provided at the root level of the device tree as it is
    common to most of the SoC.

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -57,6 +57,20 @@ Optional
   occupied by the redistributors. Required if more than one such
   region is present.
 
+- msi-controller: Boolean property. Identifies the node as an MSI
+  controller. Only present if the Message Based Interrupt
+  functionnality is being exposed by the HW, and the mbi-ranges
+  property present.
+
+- mbi-ranges: A list of pairs <intid span>, where "intid" is the first
+  SPI of a range that can be used an MBI, and "span" the size of that
+  range. Multiple ranges can be provided. Requires "msi-controller" to
+  be set.
+
+- mbi-alias: Address property. Base address of an alias of the GICD
+  region containing only the {SET,CLR}SPI registers to be used if
+  isolation is required, and if supported by the HW.
+
 Sub-nodes:
 
 PPI affinity can be expressed as a single "ppi-partitions" node,
@@ -99,6 +113,9 @@ Examples:
 		      <0x0 0x2c020000 0 0x2000>;	// GICV
 		interrupts = <1 9 4>;
 
+		msi-controller;
+		mbi-ranges = <256 128>;
+
 		gic-its@2c200000 {
 			compatible = "arm,gic-v3-its";
 			msi-controller;

Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt

@@ -5,11 +5,14 @@ Required properties:
 - compatible: Should be:
     "st,stm32-exti"
     "st,stm32h7-exti"
+    "st,stm32mp1-exti"
 - reg: Specifies base physical address and size of the registers
 - interrupt-controller: Indentifies the node as an interrupt controller
 - #interrupt-cells: Specifies the number of cells to encode an interrupt
   specifier, shall be 2
 - interrupts: interrupts references to primary interrupt controller
+  (only needed for exti controller with multiple exti under
+  same parent interrupt: st,stm32-exti and st,stm32h7-exti")
 
 Example:
 

arch/arm/boot/dts/stm32mp157-pinctrl.dtsi

@@ -12,6 +12,8 @@
 			#size-cells = <1>;
 			compatible = "st,stm32mp157-pinctrl";
 			ranges = <0 0x50002000 0xa400>;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
 			pins-are-numbered;
 
 			gpioa: gpio@50002000 {
@@ -166,6 +168,8 @@
 			compatible = "st,stm32mp157-z-pinctrl";
 			ranges = <0 0x54004000 0x400>;
 			pins-are-numbered;
+			interrupt-parent = <&exti>;
+			st,syscfg = <&exti 0x60 0xff>;
 			status = "disabled";
 
 			gpioz: gpio@54004000 {

arch/arm/boot/dts/stm32mp157c.dtsi

@@ -183,6 +183,13 @@
 			status = "disabled";
 		};
 
+		exti: interrupt-controller@5000d000 {
+			compatible = "st,stm32mp1-exti", "syscon";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x5000d000 0x400>;
+		};
+
 		usart1: serial@5c000000 {
 			compatible = "st,stm32h7-uart";
 			reg = <0x5c000000 0x400>;

arch/ia64/include/asm/hardirq.h

@@ -13,7 +13,7 @@
 
 #define __ARCH_IRQ_STAT	1
 
-#define local_softirq_pending()		(local_cpu_data->softirq_pending)
+#define local_softirq_pending_ref	ia64_cpu_info.softirq_pending
 
 #include <linux/threads.h>
 #include <linux/irq.h>

arch/parisc/include/asm/hardirq.h

@@ -34,14 +34,6 @@ DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 #define __IRQ_STAT(cpu, member) (irq_stat[cpu].member)
 #define inc_irq_stat(member)	this_cpu_inc(irq_stat.member)
 #define __inc_irq_stat(member)	__this_cpu_inc(irq_stat.member)
-#define local_softirq_pending()	this_cpu_read(irq_stat.__softirq_pending)
-
-#define __ARCH_SET_SOFTIRQ_PENDING
-
-#define set_softirq_pending(x)	\
-		this_cpu_write(irq_stat.__softirq_pending, (x))
-#define or_softirq_pending(x)	this_cpu_or(irq_stat.__softirq_pending, (x))
-
 #define ack_bad_irq(irq) WARN(1, "unexpected IRQ trap at vector %02x\n", irq)
 
 #endif /* _PARISC_HARDIRQ_H */

arch/powerpc/include/asm/hardirq.h

@@ -25,15 +25,8 @@ typedef struct {
 DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 
 #define __ARCH_IRQ_STAT
-
-#define local_softirq_pending()	__this_cpu_read(irq_stat.__softirq_pending)
-
-#define __ARCH_SET_SOFTIRQ_PENDING
 #define __ARCH_IRQ_EXIT_IRQS_DISABLED
 
-#define set_softirq_pending(x) __this_cpu_write(irq_stat.__softirq_pending, (x))
-#define or_softirq_pending(x) __this_cpu_or(irq_stat.__softirq_pending, (x))
-
 static inline void ack_bad_irq(unsigned int irq)
 {
 	printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);

arch/s390/include/asm/hardirq.h

@@ -14,6 +14,8 @@
 #include <asm/lowcore.h>
 
 #define local_softirq_pending() (S390_lowcore.softirq_pending)
+#define set_softirq_pending(x) (S390_lowcore.softirq_pending = (x))
+#define or_softirq_pending(x)  (S390_lowcore.softirq_pending |= (x))
 
 #define __ARCH_IRQ_STAT
 #define __ARCH_HAS_DO_SOFTIRQ

arch/sh/kernel/irq.c

@@ -44,7 +44,7 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 
 	seq_printf(p, "%*s: ", prec, "NMI");
 	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", irq_stat[j].__nmi_count);
+		seq_printf(p, "%10u ", nmi_count(j));
 	seq_printf(p, "  Non-maskable interrupts\n");
 
 	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));

arch/sparc/include/asm/hardirq_64.h

@@ -10,8 +10,9 @@
 #include <asm/cpudata.h>
 
 #define __ARCH_IRQ_STAT
-#define local_softirq_pending() \
-	(local_cpu_data().__softirq_pending)
+
+#define local_softirq_pending_ref \
+	__cpu_data.__softirq_pending
 
 void ack_bad_irq(unsigned int irq);
 

arch/x86/include/asm/hardirq.h

@@ -50,14 +50,6 @@ DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
 
 #define inc_irq_stat(member)	this_cpu_inc(irq_stat.member)
 
-#define local_softirq_pending()	this_cpu_read(irq_stat.__softirq_pending)
-
-#define __ARCH_SET_SOFTIRQ_PENDING
-
-#define set_softirq_pending(x)	\
-		this_cpu_write(irq_stat.__softirq_pending, (x))
-#define or_softirq_pending(x)	this_cpu_or(irq_stat.__softirq_pending, (x))
-
 extern void ack_bad_irq(unsigned int irq);
 
 extern u64 arch_irq_stat_cpu(unsigned int cpu);

drivers/base/platform-msi.c

@@ -101,6 +101,9 @@ static void platform_msi_update_chip_ops(struct msi_domain_info *info)
 		chip->irq_set_affinity = msi_domain_set_affinity;
 	if (!chip->irq_write_msi_msg)
 		chip->irq_write_msi_msg = platform_msi_write_msg;
+	if (WARN_ON((info->flags & MSI_FLAG_LEVEL_CAPABLE) &&
+		    !(chip->flags & IRQCHIP_SUPPORTS_LEVEL_MSI)))
+		info->flags &= ~MSI_FLAG_LEVEL_CAPABLE;
 }
 
 static void platform_msi_free_descs(struct device *dev, int base, int nvec)

drivers/bus/fsl-mc/fsl-mc-msi.c

@@ -163,6 +163,8 @@ struct irq_domain *fsl_mc_msi_create_irq_domain(struct fwnode_handle *fwnode,
 {
 	struct irq_domain *domain;
 
+	if (WARN_ON((info->flags & MSI_FLAG_LEVEL_CAPABLE)))
+		info->flags &= ~MSI_FLAG_LEVEL_CAPABLE;
 	if (info->flags & MSI_FLAG_USE_DEF_DOM_OPS)
 		fsl_mc_msi_update_dom_ops(info);
 	if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS)

drivers/irqchip/Makefile

@@ -27,7 +27,7 @@ obj-$(CONFIG_ARM_GIC)			+= irq-gic.o irq-gic-common.o
 obj-$(CONFIG_ARM_GIC_PM)		+= irq-gic-pm.o
 obj-$(CONFIG_ARCH_REALVIEW)		+= irq-gic-realview.o
 obj-$(CONFIG_ARM_GIC_V2M)		+= irq-gic-v2m.o
-obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
+obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-v3-mbi.o irq-gic-common.o
 obj-$(CONFIG_ARM_GIC_V3_ITS)		+= irq-gic-v3-its.o irq-gic-v3-its-platform-msi.o irq-gic-v4.o
 obj-$(CONFIG_ARM_GIC_V3_ITS_PCI)	+= irq-gic-v3-its-pci-msi.o
 obj-$(CONFIG_ARM_GIC_V3_ITS_FSL_MC)	+= irq-gic-v3-its-fsl-mc-msi.o

drivers/irqchip/irq-gic-v3-mbi.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 ARM Limited, All Rights Reserved.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ */
+
+#define pr_fmt(fmt) "GICv3: " fmt
+
+#include <linux/dma-iommu.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/msi.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include <linux/irqchip/arm-gic-v3.h>
+
+struct mbi_range {
+	u32			spi_start;
+	u32			nr_spis;
+	unsigned long		*bm;
+};
+
+static struct mutex		mbi_lock;
+static phys_addr_t		mbi_phys_base;
+static struct mbi_range		*mbi_ranges;
+static unsigned int		mbi_range_nr;
+
+static struct irq_chip mbi_irq_chip = {
+	.name			= "MBI",
+	.irq_mask		= irq_chip_mask_parent,
+	.irq_unmask		= irq_chip_unmask_parent,
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_set_type		= irq_chip_set_type_parent,
+	.irq_set_affinity	= irq_chip_set_affinity_parent,
+};
+
+static int mbi_irq_gic_domain_alloc(struct irq_domain *domain,
+				       unsigned int virq,
+				       irq_hw_number_t hwirq)
+{
+	struct irq_fwspec fwspec;
+	struct irq_data *d;
+	int err;
+
+	/*
+	 * Using ACPI? There is no MBI support in the spec, you
+	 * shouldn't even be here.
+	 */
+	if (!is_of_node(domain->parent->fwnode))
+		return -EINVAL;
+
+	/*
+	 * Let's default to edge. This is consistent with traditional
+	 * MSIs, and systems requiring level signaling will just
+	 * enforce the trigger on their own.
+	 */
+	fwspec.fwnode = domain->parent->fwnode;
+	fwspec.param_count = 3;
+	fwspec.param[0] = 0;
+	fwspec.param[1] = hwirq - 32;
+	fwspec.param[2] = IRQ_TYPE_EDGE_RISING;
+
+	err = irq_domain_alloc_irqs_parent(domain, virq, 1, &fwspec);
+	if (err)
+		return err;
+
+	d = irq_domain_get_irq_data(domain->parent, virq);
+	return d->chip->irq_set_type(d, IRQ_TYPE_EDGE_RISING);
+}
+
+static void mbi_free_msi(struct mbi_range *mbi, unsigned int hwirq,
+			 int nr_irqs)
+{
+	mutex_lock(&mbi_lock);
+	bitmap_release_region(mbi->bm, hwirq - mbi->spi_start,
+			      get_count_order(nr_irqs));
+	mutex_unlock(&mbi_lock);
+}
+
+static int mbi_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
+				   unsigned int nr_irqs, void *args)
+{
+	struct mbi_range *mbi = NULL;
+	int hwirq, offset, i, err = 0;
+
+	mutex_lock(&mbi_lock);
+	for (i = 0; i < mbi_range_nr; i++) {
+		offset = bitmap_find_free_region(mbi_ranges[i].bm,
+						 mbi_ranges[i].nr_spis,
+						 get_count_order(nr_irqs));
+		if (offset >= 0) {
+			mbi = &mbi_ranges[i];
+			break;
+		}
+	}
+	mutex_unlock(&mbi_lock);
+
+	if (!mbi)
+		return -ENOSPC;
+
+	hwirq = mbi->spi_start + offset;
+
+	for (i = 0; i < nr_irqs; i++) {
+		err = mbi_irq_gic_domain_alloc(domain, virq + i, hwirq + i);
+		if (err)
+			goto fail;
+
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+					      &mbi_irq_chip, mbi);
+	}
+
+	return 0;
+
+fail:
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+	mbi_free_msi(mbi, hwirq, nr_irqs);
+	return err;
+}
+
+static void mbi_irq_domain_free(struct irq_domain *domain,
+				unsigned int virq, unsigned int nr_irqs)
+{
+	struct irq_data *d = irq_domain_get_irq_data(domain, virq);
+	struct mbi_range *mbi = irq_data_get_irq_chip_data(d);
+
+	mbi_free_msi(mbi, d->hwirq, nr_irqs);
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
+}
+
+static const struct irq_domain_ops mbi_domain_ops = {
+	.alloc			= mbi_irq_domain_alloc,
+	.free			= mbi_irq_domain_free,
+};
+
+static void mbi_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	msg[0].address_hi = upper_32_bits(mbi_phys_base + GICD_SETSPI_NSR);
+	msg[0].address_lo = lower_32_bits(mbi_phys_base + GICD_SETSPI_NSR);
+	msg[0].data = data->parent_data->hwirq;
+
+	iommu_dma_map_msi_msg(data->irq, msg);
+}
+
+#ifdef CONFIG_PCI_MSI
+/* PCI-specific irqchip */
+static void mbi_mask_msi_irq(struct irq_data *d)
+{
+	pci_msi_mask_irq(d);
+	irq_chip_mask_parent(d);
+}
+
+static void mbi_unmask_msi_irq(struct irq_data *d)
+{
+	pci_msi_unmask_irq(d);
+	irq_chip_unmask_parent(d);
+}
+
+static struct irq_chip mbi_msi_irq_chip = {
+	.name			= "MSI",
+	.irq_mask		= mbi_mask_msi_irq,
+	.irq_unmask		= mbi_unmask_msi_irq,
+	.irq_eoi		= irq_chip_eoi_parent,
+	.irq_compose_msi_msg	= mbi_compose_msi_msg,
+	.irq_write_msi_msg	= pci_msi_domain_write_msg,
+};
+
+static struct msi_domain_info mbi_msi_domain_info = {
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		   MSI_FLAG_PCI_MSIX | MSI_FLAG_MULTI_PCI_MSI),
+	.chip	= &mbi_msi_irq_chip,
+};
+
+static int mbi_allocate_pci_domain(struct irq_domain *nexus_domain,
+				   struct irq_domain **pci_domain)
+{
+	*pci_domain = pci_msi_create_irq_domain(nexus_domain->parent->fwnode,
+						&mbi_msi_domain_info,
+						nexus_domain);
+	if (!*pci_domain)
+		return -ENOMEM;
+
+	return 0;
+}
+#else
+static int mbi_allocate_pci_domain(struct irq_domain *nexus_domain,
+				   struct irq_domain **pci_domain)
+{
+	*pci_domain = NULL;
+	return 0;
+}
+#endif
+
+static void mbi_compose_mbi_msg(struct irq_data *data, struct msi_msg *msg)
+{
+	mbi_compose_msi_msg(data, msg);
+
+	msg[1].address_hi = upper_32_bits(mbi_phys_base + GICD_CLRSPI_NSR);
+	msg[1].address_lo = lower_32_bits(mbi_phys_base + GICD_CLRSPI_NSR);
+	msg[1].data = data->parent_data->hwirq;
+
+	iommu_dma_map_msi_msg(data->irq, &msg[1]);
+}
+
+/* Platform-MSI specific irqchip */
+static struct irq_chip mbi_pmsi_irq_chip = {
+	.name			= "pMSI",
+	.irq_set_type		= irq_chip_set_type_parent,
+	.irq_compose_msi_msg	= mbi_compose_mbi_msg,
+	.flags			= IRQCHIP_SUPPORTS_LEVEL_MSI,
+};
+
+static struct msi_domain_ops mbi_pmsi_ops = {
+};
+
+static struct msi_domain_info mbi_pmsi_domain_info = {
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		   MSI_FLAG_LEVEL_CAPABLE),
+	.ops	= &mbi_pmsi_ops,
+	.chip	= &mbi_pmsi_irq_chip,
+};
+
+static int mbi_allocate_domains(struct irq_domain *parent)
+{
+	struct irq_domain *nexus_domain, *pci_domain, *plat_domain;
+	int err;
+
+	nexus_domain = irq_domain_create_tree(parent->fwnode,
+					      &mbi_domain_ops, NULL);
+	if (!nexus_domain)
+		return -ENOMEM;
+
+	irq_domain_update_bus_token(nexus_domain, DOMAIN_BUS_NEXUS);
+	nexus_domain->parent = parent;
+
+	err = mbi_allocate_pci_domain(nexus_domain, &pci_domain);
+
+	plat_domain = platform_msi_create_irq_domain(parent->fwnode,
+						     &mbi_pmsi_domain_info,
+						     nexus_domain);
+
+	if (err || !plat_domain) {
+		if (plat_domain)
+			irq_domain_remove(plat_domain);
+		if (pci_domain)
+			irq_domain_remove(pci_domain);
+		irq_domain_remove(nexus_domain);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+int __init mbi_init(struct fwnode_handle *fwnode, struct irq_domain *parent)
+{
+	struct device_node *np;
+	const __be32 *reg;
+	int ret, n;
+
+	np = to_of_node(fwnode);
+
+	if (!of_property_read_bool(np, "msi-controller"))
+		return 0;
+
+	n = of_property_count_elems_of_size(np, "mbi-ranges", sizeof(u32));
+	if (n <= 0 || n % 2)
+		return -EINVAL;
+
+	mbi_range_nr = n / 2;
+	mbi_ranges = kcalloc(mbi_range_nr, sizeof(*mbi_ranges), GFP_KERNEL);
+	if (!mbi_ranges)
+		return -ENOMEM;
+
+	for (n = 0; n < mbi_range_nr; n++) {
+		ret = of_property_read_u32_index(np, "mbi-ranges", n * 2,
+						 &mbi_ranges[n].spi_start);
+		if (ret)
+			goto err_free_mbi;
+		ret = of_property_read_u32_index(np, "mbi-ranges", n * 2 + 1,
+						 &mbi_ranges[n].nr_spis);
+		if (ret)
+			goto err_free_mbi;
+
+		mbi_ranges[n].bm = kcalloc(BITS_TO_LONGS(mbi_ranges[n].nr_spis),
+					   sizeof(long), GFP_KERNEL);
+		if (!mbi_ranges[n].bm) {
+			ret = -ENOMEM;
+			goto err_free_mbi;
+		}
+		pr_info("MBI range [%d:%d]\n", mbi_ranges[n].spi_start,
+			mbi_ranges[n].spi_start + mbi_ranges[n].nr_spis - 1);
+	}
+
+	reg = of_get_property(np, "mbi-alias", NULL);
+	if (reg) {
+		mbi_phys_base = of_translate_address(np, reg);
+		if (mbi_phys_base == OF_BAD_ADDR) {
+			ret = -ENXIO;
+			goto err_free_mbi;
+		}
+	} else {
+		struct resource res;
+
+		if (of_address_to_resource(np, 0, &res)) {
+			ret = -ENXIO;
+			goto err_free_mbi;
+		}
+
+		mbi_phys_base = res.start;
+	}
+
+	pr_info("Using MBI frame %pa\n", &mbi_phys_base);
+
+	ret = mbi_allocate_domains(parent);
+	if (ret)
+		goto err_free_mbi;
+
+	return 0;
+
+err_free_mbi:
+	if (mbi_ranges) {
+		for (n = 0; n < mbi_range_nr; n++)
+			kfree(mbi_ranges[n].bm);
+		kfree(mbi_ranges);
+	}
+
+	return ret;
+}

drivers/irqchip/irq-gic-v3.c

@@ -1099,6 +1099,7 @@ static int __init gic_init_bases(void __iomem *dist_base,
 
 	gic_data.domain = irq_domain_create_tree(handle, &gic_irq_domain_ops,
 						 &gic_data);
+	irq_domain_update_bus_token(gic_data.domain, DOMAIN_BUS_WIRED);
 	gic_data.rdists.rdist = alloc_percpu(typeof(*gic_data.rdists.rdist));
 	gic_data.rdists.has_vlpis = true;
 	gic_data.rdists.has_direct_lpi = true;
@@ -1112,6 +1113,12 @@ static int __init gic_init_bases(void __iomem *dist_base,
 	pr_info("Distributor has %sRange Selector support\n",
 		gic_data.has_rss ? "" : "no ");
 
+	if (typer & GICD_TYPER_MBIS) {
+		err = mbi_init(handle, gic_data.domain);
+		if (err)
+			pr_err("Failed to initialize MBIs\n");
+	}
+
 	set_handle_irq(gic_handle_irq);
 
 	gic_update_vlpi_properties();

drivers/irqchip/irq-meson-gpio.c

@@ -63,11 +63,16 @@ static const struct meson_gpio_irq_params gxl_params = {
 	.nr_hwirq = 110,
 };
 
+static const struct meson_gpio_irq_params axg_params = {
+	.nr_hwirq = 100,
+};
+
 static const struct of_device_id meson_irq_gpio_matches[] = {
 	{ .compatible = "amlogic,meson8-gpio-intc", .data = &meson8_params },
 	{ .compatible = "amlogic,meson8b-gpio-intc", .data = &meson8b_params },
 	{ .compatible = "amlogic,meson-gxbb-gpio-intc", .data = &gxbb_params },
 	{ .compatible = "amlogic,meson-gxl-gpio-intc", .data = &gxl_params },
+	{ .compatible = "amlogic,meson-axg-gpio-intc", .data = &axg_params },
 	{ }
 };
 

drivers/irqchip/irq-mvebu-gicp.c

@@ -19,8 +19,6 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "irq-mvebu-gicp.h"
-
 #define GICP_SETSPI_NSR_OFFSET	0x0
 #define GICP_CLRSPI_NSR_OFFSET	0x8
 
@@ -55,34 +53,18 @@ static int gicp_idx_to_spi(struct mvebu_gicp *gicp, int idx)
 	return -EINVAL;
 }
 
-int mvebu_gicp_get_doorbells(struct device_node *dn, phys_addr_t *setspi,
-			     phys_addr_t *clrspi)
-{
-	struct platform_device *pdev;
-	struct mvebu_gicp *gicp;
-
-	pdev = of_find_device_by_node(dn);
-	if (!pdev)
-		return -ENODEV;
-
-	gicp = platform_get_drvdata(pdev);
-	if (!gicp)
-		return -ENODEV;
-
-	*setspi = gicp->res->start + GICP_SETSPI_NSR_OFFSET;
-	*clrspi = gicp->res->start + GICP_CLRSPI_NSR_OFFSET;
-
-	return 0;
-}
-
 static void gicp_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 {
 	struct mvebu_gicp *gicp = data->chip_data;
 	phys_addr_t setspi = gicp->res->start + GICP_SETSPI_NSR_OFFSET;
-
-	msg->data = data->hwirq;
-	msg->address_lo = lower_32_bits(setspi);
-	msg->address_hi = upper_32_bits(setspi);
+	phys_addr_t clrspi = gicp->res->start + GICP_CLRSPI_NSR_OFFSET;
+
+	msg[0].data = data->hwirq;
+	msg[0].address_lo = lower_32_bits(setspi);
+	msg[0].address_hi = upper_32_bits(setspi);
+	msg[1].data = data->hwirq;
+	msg[1].address_lo = lower_32_bits(clrspi);
+	msg[1].address_hi = upper_32_bits(clrspi);
 }
 
 static struct irq_chip gicp_irq_chip = {
@@ -170,13 +152,15 @@ static const struct irq_domain_ops gicp_domain_ops = {
 static struct irq_chip gicp_msi_irq_chip = {
 	.name		= "GICP",
 	.irq_set_type	= irq_chip_set_type_parent,
+	.flags		= IRQCHIP_SUPPORTS_LEVEL_MSI,
 };
 
 static struct msi_domain_ops gicp_msi_ops = {
 };
 
 static struct msi_domain_info gicp_msi_domain_info = {
-	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS),
+	.flags	= (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
+		   MSI_FLAG_LEVEL_CAPABLE),
 	.ops	= &gicp_msi_ops,
 	.chip	= &gicp_msi_irq_chip,
 };

drivers/irqchip/irq-mvebu-gicp.h

-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __MVEBU_GICP_H__
-#define __MVEBU_GICP_H__
-
-#include <linux/types.h>
-
-struct device_node;
-
-int mvebu_gicp_get_doorbells(struct device_node *dn, phys_addr_t *setspi,
-			     phys_addr_t *clrspi);
-
-#endif /* __MVEBU_GICP_H__ */