Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (45 commits)
  [MIPS] Pb1200/DBAu1200: move platform code to its proper place
  [MIPS] Fix handling of trap and breakpoint instructions
  [MIPS] Pb1200: do register SMC 91C111
  [MIPS] DBAu1200: fix bad SMC 91C111 resource size
  [NET] Kconfig: Rename MIKROTIK_RB500 -> MIKROTIK_RB532
  [MIPS] IP27: Fix build bug due to missing include
  [MIPS] Fix some sparse warnings on traps.c and irq-msc01.c
  [MIPS] cevt-gt641xx: Kill unnecessary include
  [MIPS] DS1287: Add clockevent driver
  [MIPS] add DECstation I/O ASIC clocksource
  [MIPS] rbtx4938: minor cleanup
  [MIPS] Alchemy: kill unused PCI_IRQ_TABLE_LOOKUP macro
  [MIPS] rbtx4938: misc cleanups
  [MIPS] jmr3927: use generic txx9 gpio
  [MIPS] rbhma4500: use generic txx9 gpio
  [MIPS] generic txx9 gpio support
  [MIPS] make fallback gpio.h gpiolib-friendly
  [MIPS] unexport null_perf_irq() and make it static
  [MIPS] unexport rtc_mips_set_time()
  [MIPS] unexport copy_from_user_page()
  ...

arch/mips/Kconfig

@@ -81,7 +81,9 @@ config MIPS_COBALT
 config MACH_DECSTATION
 	bool "DECstations"
 	select BOOT_ELF32
+	select CEVT_DS1287
 	select CEVT_R4K
+	select CSRC_IOASIC
 	select CSRC_R4K
 	select CPU_DADDI_WORKAROUNDS if 64BIT
 	select CPU_R4000_WORKAROUNDS if 64BIT
@@ -221,6 +223,7 @@ config MIPS_MALTA
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select IRQ_CPU
+	select IRQ_GIC
 	select HW_HAS_PCI
 	select I8253
 	select I8259
@@ -309,12 +312,12 @@ config MACH_VR41XX
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
 config PNX8550_JBS
-	bool "Philips PNX8550 based JBS board"
+	bool "NXP PNX8550 based JBS board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_STB810
-	bool "Philips PNX8550 based STB810 board"
+	bool "NXP PNX8550 based STB810 board"
 	select PNX8550
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
@@ -612,6 +615,7 @@ config TOSHIBA_JMR3927
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GPIO_TXX9
 
 config TOSHIBA_RBTX4927
 	bool "Toshiba RBTX49[23]7 board"
@@ -653,7 +657,7 @@ config TOSHIBA_RBTX4938
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_KGDB
 	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select GENERIC_GPIO
+	select GPIO_TXX9
 	help
 	  This Toshiba board is based on the TX4938 processor. Say Y here to
 	  support this machine type
@@ -767,6 +771,9 @@ config BOOT_RAW
 config CEVT_BCM1480
 	bool
 
+config CEVT_DS1287
+	bool
+
 config CEVT_GT641XX
 	bool
 
@@ -782,12 +789,20 @@ config CEVT_TXX9
 config CSRC_BCM1480
 	bool
 
+config CSRC_IOASIC
+	bool
+
 config CSRC_R4K
 	bool
 
 config CSRC_SB1250
 	bool
 
+config GPIO_TXX9
+	select GENERIC_GPIO
+	select HAVE_GPIO_LIB
+	bool
+
 config CFE
 	bool
 
@@ -840,6 +855,9 @@ config MIPS_NILE4
 config MIPS_DISABLE_OBSOLETE_IDE
 	bool
 
+config SYNC_R4K
+	bool
+
 config NO_IOPORT
 	def_bool n
 
@@ -909,6 +927,9 @@ config IRQ_TXX9
 config IRQ_GT641XX
 	bool
 
+config IRQ_GIC
+	bool
+
 config MIPS_BOARDS_GEN
 	bool
 
@@ -1811,6 +1832,17 @@ config NR_CPUS
 	  performance should round up your number of processors to the next
 	  power of two.
 
+config MIPS_CMP
+	bool "MIPS CMP framework support"
+	depends on SMP
+	select SYNC_R4K
+	select SYS_SUPPORTS_SCHED_SMT
+	select WEAK_ORDERING
+	default n
+	help
+	  This is a placeholder option for the GCMP work. It will need to
+	  be handled differently...
+
 source "kernel/time/Kconfig"
 
 #

arch/mips/Kconfig.debug

@@ -73,14 +73,4 @@ config RUNTIME_DEBUG
 	  include/asm-mips/debug.h for debuging macros.
 	  If unsure, say N.
 
-config MIPS_UNCACHED
-	bool "Run uncached"
-	depends on DEBUG_KERNEL && !SMP && !SGI_IP27
-	help
-	  If you say Y here there kernel will disable all CPU caches.  This will
-	  reduce the system's performance dramatically but can help finding
-	  otherwise hard to track bugs.  It can also useful if you're doing
-	  hardware debugging with a logic analyzer and need to see all traffic
-	  on the bus.
-
 endmenu

arch/mips/Makefile

@@ -410,21 +410,21 @@ load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
 load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
 
 #
-# Common Philips PNX8550
+# Common NXP PNX8550
 #
-core-$(CONFIG_SOC_PNX8550)	+= arch/mips/philips/pnx8550/common/
+core-$(CONFIG_SOC_PNX8550)	+= arch/mips/nxp/pnx8550/common/
 cflags-$(CONFIG_SOC_PNX8550)	+= -Iinclude/asm-mips/mach-pnx8550
 
 #
-# Philips PNX8550 JBS board
+# NXP PNX8550 JBS board
 #
-libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/philips/pnx8550/jbs/
+libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/nxp/pnx8550/jbs/
 #cflags-$(CONFIG_PNX8550_JBS)	+= -Iinclude/asm-mips/mach-pnx8550
 load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
 
-# Philips PNX8550 STB810 board
+# NXP PNX8550 STB810 board
 #
-libs-$(CONFIG_PNX8550_STB810)	+= arch/mips/philips/pnx8550/stb810/
+libs-$(CONFIG_PNX8550_STB810)	+= arch/mips/nxp/pnx8550/stb810/
 load-$(CONFIG_PNX8550_STB810)	+= 0xffffffff80060000
 
 # NEC EMMA2RH boards

arch/mips/au1000/common/cputable.c

@@ -11,10 +11,7 @@
  *  as published by the Free Software Foundation; either version
  *  2 of the License, or (at your option) any later version.
  */
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/threads.h>
-#include <linux/init.h>
+
 #include <asm/mach-au1x00/au1000.h>
 
 struct cpu_spec* cur_cpu_spec[NR_CPUS];

arch/mips/au1000/common/dbdma.c

@@ -31,18 +31,12 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_dbdma.h>
-#include <asm/system.h>
-
 
 #if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
 

arch/mips/au1000/common/dbg_io.c

 
-#include <asm/io.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #ifdef CONFIG_KGDB
@@ -55,8 +54,7 @@ typedef         unsigned int  uint32;
 #define UART16550_READ(y)    (au_readl(DEBUG_BASE + y) & 0xff)
 #define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y))
 
-extern unsigned long get_au1x00_uart_baud_base(void);
-extern unsigned long cal_r4koff(void);
+extern unsigned long calc_clock(void);
 
 void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 {
@@ -64,7 +62,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
 	if (UART16550_READ(UART_MOD_CNTRL) != 0x3) {
 		UART16550_WRITE(UART_MOD_CNTRL, 3);
 	}
-	cal_r4koff();
+	calc_clock();
 
 	/* disable interrupts */
 	UART16550_WRITE(UART_IER, 0);

arch/mips/au1000/common/dma.c

@@ -33,12 +33,9 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/spinlock.h>
-#include <linux/string.h>
-#include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <asm/system.h>
+
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>
 

arch/mips/au1000/common/gpio.c

@@ -27,13 +27,8 @@
  * 	others have a second one : GPIO2
  */
 
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/types.h>
 #include <linux/module.h>
 
-#include <asm/addrspace.h>
-
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/gpio.h>
 

arch/mips/au1000/common/irq.c

 /*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *		ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
  *
@@ -27,7 +26,6 @@
  */
 #include <linux/bitops.h>
 #include <linux/init.h>
-#include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
@@ -591,7 +589,7 @@ void __init arch_init_irq(void)
 		imp++;
 	}
 
-	set_c0_status(ALLINTS);
+	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4);
 
 	/* Board specific IRQ initialization.
 	*/

arch/mips/au1000/common/pci.c

@@ -30,7 +30,7 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/types.h>
+
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>

arch/mips/au1000/common/platform.c

@@ -3,18 +3,65 @@
  *
  * Copyright 2004, Matt Porter <mporter@kernel.crashing.org>
  *
+ * (C) Copyright Embedded Alley Solutions, Inc 2005
+ * Author: Pantelis Antoniou <pantelis@embeddedalley.com>
+ *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-#include <linux/device.h>
+
 #include <linux/platform_device.h>
-#include <linux/kernel.h>
+#include <linux/serial_8250.h>
 #include <linux/init.h>
-#include <linux/resource.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
 
+#define PORT(_base, _irq)				\
+	{						\
+		.iobase		= _base,		\
+		.membase	= (void __iomem *)_base,\
+		.mapbase	= CPHYSADDR(_base),	\
+		.irq		= _irq,			\
+		.regshift	= 2,			\
+		.iotype		= UPIO_AU,		\
+		.flags		= UPF_SKIP_TEST 	\
+	}
+
+static struct plat_serial8250_port au1x00_uart_data[] = {
+#if defined(CONFIG_SERIAL_8250_AU1X00)
+#if defined(CONFIG_SOC_AU1000)
+	PORT(UART0_ADDR, AU1000_UART0_INT),
+	PORT(UART1_ADDR, AU1000_UART1_INT),
+	PORT(UART2_ADDR, AU1000_UART2_INT),
+	PORT(UART3_ADDR, AU1000_UART3_INT),
+#elif defined(CONFIG_SOC_AU1500)
+	PORT(UART0_ADDR, AU1500_UART0_INT),
+	PORT(UART3_ADDR, AU1500_UART3_INT),
+#elif defined(CONFIG_SOC_AU1100)
+	PORT(UART0_ADDR, AU1100_UART0_INT),
+	PORT(UART1_ADDR, AU1100_UART1_INT),
+	PORT(UART3_ADDR, AU1100_UART3_INT),
+#elif defined(CONFIG_SOC_AU1550)
+	PORT(UART0_ADDR, AU1550_UART0_INT),
+	PORT(UART1_ADDR, AU1550_UART1_INT),
+	PORT(UART3_ADDR, AU1550_UART3_INT),
+#elif defined(CONFIG_SOC_AU1200)
+	PORT(UART0_ADDR, AU1200_UART0_INT),
+	PORT(UART1_ADDR, AU1200_UART1_INT),
+#endif
+#endif	/* CONFIG_SERIAL_8250_AU1X00 */
+	{ },
+};
+
+static struct platform_device au1xx0_uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_AU1X00,
+	.dev			= {
+		.platform_data	= au1x00_uart_data,
+	},
+};
+
 /* OHCI (USB full speed host controller) */
 static struct resource au1xxx_usb_ohci_resources[] = {
 	[0] = {
@@ -186,19 +233,6 @@ static struct resource au1200_lcd_resources[] = {
 	}
 };
 
-static struct resource au1200_ide0_resources[] = {
-	[0] = {
-		.start		= AU1XXX_ATA_PHYS_ADDR,
-		.end 		= AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= AU1XXX_ATA_INT,
-		.end		= AU1XXX_ATA_INT,
-		.flags		= IORESOURCE_IRQ,
-	}
-};
-
 static u64 au1200_lcd_dmamask = ~(u32)0;
 
 static struct platform_device au1200_lcd_device = {
@@ -212,20 +246,6 @@ static struct platform_device au1200_lcd_device = {
 	.resource       = au1200_lcd_resources,
 };
 
-
-static u64 ide0_dmamask = ~(u32)0;
-
-static struct platform_device au1200_ide0_device = {
-	.name		= "au1200-ide",
-	.id		= 0,
-	.dev = {
-		.dma_mask 		= &ide0_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
-	},
-	.num_resources = ARRAY_SIZE(au1200_ide0_resources),
-	.resource	= au1200_ide0_resources,
-};
-
 static u64 au1xxx_mmc_dmamask =  ~(u32)0;
 
 static struct platform_device au1xxx_mmc_device = {
@@ -245,31 +265,6 @@ static struct platform_device au1x00_pcmcia_device = {
 	.id 		= 0,
 };
 
-#ifdef CONFIG_MIPS_DB1200
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name	= "smc91x-regs",
-		.start	= AU1XXX_SMC91111_PHYS_ADDR,
-		.end	= AU1XXX_SMC91111_PHYS_ADDR + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AU1XXX_SMC91111_IRQ,
-		.end	= AU1XXX_SMC91111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-#endif
-
 /* All Alchemy demoboards with I2C have this #define in their headers */
 #ifdef SMBUS_PSC_BASE
 static struct resource pbdb_smbus_resources[] = {
@@ -289,6 +284,7 @@ static struct platform_device pbdb_smbus_device = {
 #endif
 
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
+	&au1xx0_uart_device,
 	&au1xxx_usb_ohci_device,
 	&au1x00_pcmcia_device,
 #ifdef CONFIG_FB_AU1100
@@ -299,12 +295,8 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xxx_usb_gdt_device,
 	&au1xxx_usb_otg_device,
 	&au1200_lcd_device,
-	&au1200_ide0_device,
 	&au1xxx_mmc_device,
 #endif
-#ifdef CONFIG_MIPS_DB1200
-	&smc91x_device,
-#endif
 #ifdef SMBUS_PSC_BASE
 	&pbdb_smbus_device,
 #endif
@@ -312,6 +304,13 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 
 int __init au1xxx_platform_init(void)
 {
+	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
+	int i;
+
+	/* Fill up uartclk. */
+	for (i = 0; au1x00_uart_data[i].flags ; i++)
+		au1x00_uart_data[i].uartclk = uartclk;
+
 	return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
 }
 

arch/mips/au1000/common/power.c

@@ -29,17 +29,14 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
 #include <linux/pm.h>
 #include <linux/pm_legacy.h>
-#include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/jiffies.h>
 
-#include <asm/string.h>
 #include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
 #include <asm/cacheflush.h>
 #include <asm/mach-au1x00/au1000.h>
 
@@ -47,17 +44,13 @@
 
 #define DEBUG 1
 #ifdef DEBUG
-#  define DPRINTK(fmt, args...)	printk("%s: " fmt, __FUNCTION__ , ## args)
+#  define DPRINTK(fmt, args...)	printk("%s: " fmt, __func__, ## args)
 #else
 #  define DPRINTK(fmt, args...)
 #endif
 
 static void au1000_calibrate_delay(void);
 
-extern void set_au1x00_speed(unsigned int new_freq);
-extern unsigned int get_au1x00_speed(void);
-extern unsigned long get_au1x00_uart_baud_base(void);
-extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
 extern unsigned long save_local_and_disable(int controller);
 extern void restore_local_and_enable(int controller, unsigned long mask);
 extern void local_enable_irq(unsigned int irq_nr);

arch/mips/au1000/common/prom.c

@@ -33,8 +33,8 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/string.h>
 

arch/mips/au1000/common/puts.c

@@ -28,7 +28,6 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/types.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #define SERIAL_BASE   UART_BASE

arch/mips/au1000/common/reset.c

@@ -27,13 +27,7 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
+
 #include <asm/mach-au1x00/au1000.h>
 
 extern int au_sleep(void);

arch/mips/au1000/common/setup.c

@@ -25,21 +25,14 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/sched.h>
 #include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
 #include <linux/module.h>
 #include <linux/pm.h>
 
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
 #include <asm/mipsregs.h>
 #include <asm/reboot.h>
-#include <asm/pgtable.h>
 #include <asm/time.h>
 
 #include <au1000.h>
@@ -49,8 +42,6 @@ extern void __init board_setup(void);
 extern void au1000_restart(char *);
 extern void au1000_halt(void);
 extern void au1000_power_off(void);
-extern void au1x_time_init(void);
-extern void au1x_timer_setup(struct irqaction *irq);
 extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)

arch/mips/au1000/common/sleeper.S

@@ -9,9 +9,9 @@
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
+
 #include <asm/asm.h>
 #include <asm/mipsregs.h>
-#include <asm/addrspace.h>
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
 

arch/mips/au1000/common/time.c

 /*
  *
- * Copyright (C) 2001 MontaVista Software, ppopov@mvista.com
+ * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
  * Copied and modified Carsten Langgaard's time.c
  *
  * Carsten Langgaard, carstenl@mips.com
@@ -34,23 +34,13 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
 #include <linux/spinlock.h>
-#include <linux/hardirq.h>
 
-#include <asm/compiler.h>
 #include <asm/mipsregs.h>
 #include <asm/time.h>
-#include <asm/div64.h>
 #include <asm/mach-au1x00/au1000.h>
 
-#include <linux/mc146818rtc.h>
-#include <linux/timex.h>
-
-static unsigned long r4k_offset; /* Amount to increment compare reg each time */
-static unsigned long r4k_cur;    /* What counter should be at next timer irq */
-int	no_au1xxx_32khz;
+static int no_au1xxx_32khz;
 extern int allow_au1k_wait; /* default off for CP0 Counter */
 
 #ifdef CONFIG_PM
@@ -184,7 +174,7 @@ wakeup_counter0_set(int ticks)
  * "wait" is enabled, and we need to detect if the 32KHz isn't present
  * but requested......got it? :-)		-- Dan
  */
-unsigned long cal_r4koff(void)
+unsigned long calc_clock(void)
 {
 	unsigned long cpu_speed;
 	unsigned long flags;
@@ -229,19 +219,13 @@ unsigned long cal_r4koff(void)
 	// Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
 	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
 	spin_unlock_irqrestore(&time_lock, flags);
-	return (cpu_speed / HZ);
+	return cpu_speed;
 }
 
 void __init plat_time_init(void)
 {
-	unsigned int est_freq;
-
-	printk("calculating r4koff... ");
-	r4k_offset = cal_r4koff();
-	printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+	unsigned int est_freq = calc_clock();
 
-	//est_freq = 2*r4k_offset*HZ;
-	est_freq = r4k_offset*HZ;
 	est_freq += 5000;    /* round */
 	est_freq -= est_freq%10000;
 	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
@@ -249,9 +233,6 @@ void __init plat_time_init(void)
  	set_au1x00_speed(est_freq);
  	set_au1x00_lcd_clock(); // program the LCD clock
 
-	r4k_cur = (read_c0_count() + r4k_offset);
-	write_c0_compare(r4k_cur);
-
 #ifdef CONFIG_PM
 	/*
 	 * setup counter 0, since it keeps ticking after a
@@ -265,12 +246,8 @@ void __init plat_time_init(void)
 	 * Check to ensure we really have a 32KHz oscillator before
 	 * we do this.
 	 */
-	if (no_au1xxx_32khz) {
+	if (no_au1xxx_32khz)
 		printk("WARNING: no 32KHz clock found.\n");
-
-		/* Ensure we get CPO_COUNTER interrupts.  */
-		set_c0_status(IE_IRQ5);
-	}
 	else {
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
 		au_writel(0, SYS_TOYWRITE);

arch/mips/au1000/db1x00/board_setup.c

@@ -27,20 +27,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
+
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/db1x00.h>
 

arch/mips/au1000/db1x00/init.c

@@ -28,13 +28,8 @@
  */
 
 #include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <linux/string.h>
 #include <linux/kernel.h>
 
-#include <asm/addrspace.h>
 #include <asm/bootinfo.h>
 
 #include <prom.h>