Since there is no user except CONFIG_BOOT_CONFIG and no plan
to use it from other functions, CONFIG_LIBXBC can be removed
and we can use CONFIG_BOOT_CONFIG directly.

Link: http://lkml.kernel.org/r/158098769281.939.16293492056419481105.stgit@devnote2



Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Since printk() wrapper macro uses __VA_ARGS__ without "##" prefix, it causes
a build error if there is no variable arguments (e.g. only fmt is
specified.) To fix this error, use ##__VA_ARGS__ instead of __VAR_ARGS__.

Link: http://lkml.kernel.org/r/158108370130.2758.10893830923800978011.stgit@devnote2



Fixes: 950313eb ("tools: bootconfig: Add bootconfig command")
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Show the number of bootconfig nodes on boot message.

Link: http://lkml.kernel.org/r/158091062297.27924.9051634676068550285.stgit@devnote2



Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Show the number of bootconfig nodes when applying new bootconfig to
initrd.

Since there are limitations of bootconfig not only in its filesize,
but also the number of nodes, the number should be shown when applying
so that user can get the feeling of scale of current bootconfig.

Link: http://lkml.kernel.org/r/158091061337.27924.10886706631693823982.stgit@devnote2



Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add more error messages for following cases.
 - Exceeding max number of nodes
 - Config tree data is empty (e.g. comment only)
 - Config data is empty or exceeding max size
 - bootconfig is already initialized

Link: http://lkml.kernel.org/r/158091060401.27924.9024818742827122764.stgit@devnote2



Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Use "bootconfig" (1 word) instead of "boot config" (2 words)
in the boot message.

Link: http://lkml.kernel.org/r/158091059459.27924.14414336187441539879.stgit@devnote2



Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.

Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72



Cc: stable@vger.kernel.org
Fixes: b9b0c831 ("ftrace: Convert graph filter to use hash tables")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Because the function graph tracer can execute in sections where RCU is not
"watching", the rcu_dereference_sched() for the has needs to be open coded.
This is fine because the RCU "flavor" of the ftrace hash is protected by
its own RCU handling (it does its own little synchronization on every CPU
and does not rely on RCU sched).

Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fix following instances of sparse error
kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison

Use rcu_dereference_protected to dereference the newly annotated pointer.

Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.com



Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Fix following instances of sparse error
kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison
kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison
kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison
kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison

Use rcu_dereference_protected to access the __rcu annotated pointer.

Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.com



Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

As the bootconfig is appended to the initrd it is not as easy to modify as
the kernel command line. If there's some issue with the kernel, and the
developer wants to boot a pristine kernel, it should not be needed to modify
the initrd to remove the bootconfig for a single boot.

As bootconfig is silently added (if the admin does not know where to look
they may not know it's being loaded). It should be explicitly added to the
kernel cmdline. The loading of the bootconfig is only done if "bootconfig"
is on the kernel command line. This will let admins know that the kernel
command line is extended.

Note, after adding printk()s for when the size is too great or the checksum
is wrong, exposed that the current method always looked for the boot config,
and if this size and checksum matched, it would parse it (as if either is
wrong a printk has been added to show this). It's better to only check this
if the boot config is asked to be looked for.

Link: https://lore.kernel.org/r/CAHk-=wjfjO+h6bQzrTf=YCZA53Y3EDyAs3Z4gEsT7icA3u_Psw@mail.gmail.com



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The dynevent_cmd commands that build up the command string don't need
to do that themselves - there's a seq_buf facility that does pretty
much the same thing those command are doing manually, so use it
instead.

Link: http://lkml.kernel.org/r/eb8a6e835c964d0ab8a38cbf5ffa60746b54a465.1580506712.git.zanussi@kernel.org



Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The final addition to q is unnecessary, since q isn't ever used
afterwards.

Link: http://lkml.kernel.org/r/7880a1268217886cdba7035526650195668da856.1580506712.git.zanussi@kernel.org



Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

It's kind of strange to have check_arg() callbacks as part of the arg
objects themselves; it makes more sense to just pass these in when the
args are added instead.

Remove the check_arg() callbacks from those objects which also means
removing the check_arg() args from the init functions, adding them to
the add functions and fixing up existing callers.

Link: http://lkml.kernel.org/r/c7708d6f177fcbe1a36b6e4e8e150907df0fa5d2.1580506712.git.zanussi@kernel.org



Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The synth_event trace code contains some almost identical functions
and some small functions that are called only once - consolidate the
common code into single functions and fold in the small functions to
simplify the code overall.

Link: http://lkml.kernel.org/r/d1c8d8ad124a653b7543afe801d38c199ca5c20e.1580506712.git.zanussi@kernel.org



Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The patch 'tracing: Fix histogram code when expression has same var as
value' added code to return an existing variable reference when
creating a new variable reference, which resulted in var_ref_vals
slots being reused instead of being duplicated.

The implementation of the trace action assumes that the end of the
var_ref_vals array starting at action_data.var_ref_idx corresponds to
the values that will be assigned to the trace params. The patch
mentioned above invalidates that assumption, which means that each
param needs to explicitly specify its index into var_ref_vals.

This fix changes action_data.var_ref_idx to an array of var ref
indexes to account for that.

Link: https://lore.kernel.org/r/1580335695.6220.8.camel@kernel.org



Fixes: 8bcebc77 ("tracing: Fix histogram code when expression has same var as value")
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Have trace_boot_add_synth_event() use the synth_event interface.

Also, rename synth_event_run_cmd() to synth_event_run_command() now
that trace_boot's version is gone.

Link: http://lkml.kernel.org/r/94f1fa0e31846d0bddca916b8663404b20559e34.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Move all the tracing selftest configs to the bottom of the tracing menu.
There's no reason for them to be interspersed throughout.

Also, move the bootconfig menu to the top.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Move the config that enables the mmiotracer with the other tracers such that
all the tracers are together.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The MMIO test module was by itself, move it to the other test modules. Also,
add the text "Test module" to PREEMPTIRQ_DELAY_TEST as that create a test
module as well.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The features that depend on the function tracer were spread out through the
tracing menu, pull them together as it is easier to manage.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add Documentation for creating and generating synthetic events from
modules.

Link: http://lkml.kernel.org/r/734bf8789ff8700000c9acde61a553427910ddb5.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add a test module that checks the basic functionality of the in-kernel
kprobe event command generation API by creating kprobe events from a
module.

Link: http://lkml.kernel.org/r/97e502b204f9dba948e3fa3a4315448298218787.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Have trace_boot_add_kprobe_event() use the kprobe_event interface.

Also, rename kprobe_event_run_cmd() to kprobe_event_run_command() now
that trace_boot's version is gone.

Link: http://lkml.kernel.org/r/af5429d11291ab1e9a85a0ff944af3b2bcf193c7.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add functions used to generate kprobe event commands, built on top of
the dynevent_cmd interface.

kprobe_event_gen_cmd_start() is used to create a kprobe event command
using a variable arg list, and kretprobe_event_gen_cmd_start() does
the same for kretprobe event commands.  kprobe_event_add_fields() can
be used to add single fields one by one or as a group.  Once all
desired fields are added, kprobe_event_gen_cmd_end() or
kretprobe_event_gen_cmd_end() respectively are used to actually
execute the command and create the event.

Link: http://lkml.kernel.org/r/95cc4696502bb6017f9126f306a45ad19b4cc14f.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add a test module that checks the basic functionality of the in-kernel
synthetic event generation API by generating and tracing synthetic
events from a module.

Link: http://lkml.kernel.org/r/fcb4dd9eb9eefb70ab20538d3529d51642389664.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add an exported function named synth_event_trace(), allowing modules
or other kernel code to trace synthetic events.

Also added are several functions that allow the same functionality to
be broken out in a piecewise fashion, which are useful in situations
where tracing an event from a full array of values would be
cumbersome.  Those functions are synth_event_trace_start/end() and
synth_event_add_(next)_val().

Link: http://lkml.kernel.org/r/7a84de5f1854acf4144b57efe835ca645afa764f.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add functions used to generate synthetic event commands, built on top
of the dynevent_cmd interface.

synth_event_gen_cmd_start() is used to create a synthetic event
command using a variable arg list and
synth_event_gen_cmd_array_start() does the same thing but using an
array of field descriptors.  synth_event_add_field(),
synth_event_add_field_str() and synth_event_add_fields() can be used
to add single fields one by one or as a group.  Once all desired
fields are added, synth_event_gen_cmd_end() is used to actually
execute the command and create the event.

synth_event_create() does everything, including creating the event, in
a single call.

Link: http://lkml.kernel.org/r/38fef702fad5ef208009f459552f34a94befd860.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add an interface used to build up dynamic event creation commands,
such as synthetic and kprobe events.  Interfaces specific to those
particular types of events and others can be built on top of this
interface.

Command creation is started by first using the dynevent_cmd_init()
function to initialize the dynevent_cmd object.  Following that, args
are appended and optionally checked by the dynevent_arg_add() and
dynevent_arg_pair_add() functions, which use objects representing
arguments and pairs of arguments, initialized respectively by
dynevent_arg_init() and dynevent_arg_pair_init().  Finally, once all
args have been successfully added, the command is finalized and
actually created using dynevent_create().

The code here for actually printing into the dyn_event->cmd buffer
using snprintf() etc was adapted from v4 of Masami's 'tracing/boot:
Add synthetic event support' patch.

Link: http://lkml.kernel.org/r/1f65fa44390b6f238f6036777c3784ced1dcc6a0.1580323897.git.zanussi@kernel.org



Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

create_or_delete_synth_event() contains code to delete a synthetic
event, which would be useful on its own - specifically, it would be
useful to allow event-creating modules to call it separately.

Separate out the delete code from that function and create an exported
function named synth_event_delete().

Link: http://lkml.kernel.org/r/050db3b06df7f0a4b8a2922da602d1d879c7c1c2.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add a function to get an event file and prevent it from going away on
module or instance removal.

trace_get_event_file() will find an event file in a given instance (if
instance is NULL, it assumes the top trace array) and return it,
pinning the instance's trace array as well as the event's module, if
applicable, so they won't go away while in use.

trace_put_event_file() does the matching release.

Link: http://lkml.kernel.org/r/bb31ac4bdda168d5ed3c4b5f5a4c8f633e8d9118.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
[ Moved trace_array_put() to end of trace_put_event_file() ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add a new trace_array_find() function that can be used to find a trace
array given the instance name, and replace existing code that does the
same thing with it.  Also add trace_array_find_get() which does the
same but returns the trace array after upping its refcount.

Also make both available for use outside of trace.c.

Link: http://lkml.kernel.org/r/cb68528c975eba95bee4561ac67dd1499423b2e5.1580323897.git.zanussi@kernel.org



Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

Without patch:
 # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger
 dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset
 n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
 # Available triggers:
 # traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
 6+1 records in
 6+1 records out
 206 bytes copied, 0.00027916 s, 738 kB/s

Notice the printing of "# Available triggers:..." after the line.

With the patch:
 # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger
 dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset
 n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist
 2+1 records in
 2+1 records out
 88 bytes copied, 0.000526867 s, 167 kB/s

It only prints the end of the file, and does not restart.

Link: http://lkml.kernel.org/r/3c35ee24-dd3a-8119-9c19-552ed253388a@virtuozzo.com

https://bugzilla.kernel.org/show_bug.cgi?id=206283


Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

Link: http://lkml.kernel.org/r/7ad85b22-1866-977c-db17-88ac438bc764@virtuozzo.com



Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
[ This is not a bug fix, it just makes it "technically correct"
  which is why I applied it. NULL is only returned on an anomaly
  which triggers a WARN_ON ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.

Without patch:
 # dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid
 dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset
 id
 no pid
 2+1 records in
 2+1 records out
 10 bytes copied, 0.000213285 s, 46.9 kB/s

Notice the "id" followed by "no pid".

With the patch:
 # dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid
 dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset
 id
 0+1 records in
 0+1 records out
 3 bytes copied, 0.000202112 s, 14.8 kB/s

Notice that it only prints "id" and not the "no pid" afterward.

Link: http://lkml.kernel.org/r/4f87c6ad-f114-30bb-8506-c32274ce2992@virtuozzo.com

https://bugzilla.kernel.org/show_bug.cgi?id=206283


Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Reading the sched_cmdline_ref and sched_tgid_ref initial state within
tracing_start_sched_switch without holding the sched_register_mutex is
racy against concurrent updates, which can lead to tracepoint probes
being registered more than once (and thus trigger warnings within
tracepoint.c).

[ May be the fix for this bug ]
Link: https://lore.kernel.org/r/000000000000ab6f84056c786b93@google.com

Link: http://lkml.kernel.org/r/20190817141208.15226-1-mathieu.desnoyers@efficios.com



Cc: stable@vger.kernel.org
CC: Steven Rostedt (VMware) <rostedt@goodmis.org>
CC: Joel Fernandes (Google) <joel@joelfernandes.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Paul E. McKenney <paulmck@linux.ibm.com>
Reported-by:  <syzbot+774fddf07b7ab29a1e55@syzkaller.appspotmail.com>
Fixes: d914ba37 ("tracing: Add support for recording tgid of tasks")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Move external function declarations into kernel/trace/trace.h
from trace_boot.c for tracing subsystem internal use.

Link: http://lkml.kernel.org/r/158029060405.12381.11944554430359702545.stgit@devnote2



Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Include some required (but currently indirectly included)
headers and sort it alphabetically.

Link: http://lkml.kernel.org/r/158029059514.12381.6597832266860248781.stgit@devnote2



Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Add a testcase ensuring that the tracing error_log correctly displays
hist trigger parsing errors.

Link: http://lkml.kernel.org/r/62ec58d9aca661cde46ba678e32a938427945e9e.1561743018.git.zanussi@kernel.org



Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The 'hist:' prefix gets stripped from the command text during command
processing, but should be added back when displaying the command
during error processing.

Not only because it's what should be displayed but also because not
having it means the test cases fail because the caret is miscalculated
by the length of the prefix string.

Link: http://lkml.kernel.org/r/449df721f560042e22382f67574bcc5b4d830d3d.1561743018.git.zanussi@kernel.org



Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>