It really is a boolean.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

It's a little awkward to try to keep the weston_output::region and
weston_output::previous_damage allocate exactly only when the output is
enabled. There was also a leak: weston_output_move() was calling
weston_output_init_geometry() on an already allocated regions without
fini in between.

Fix both issues by allocating the regions in weston_output_init(),
always fini/init'ing them in weston_output_init_geometry(), and fini'ing
for good in weston_output_destroy().

This nicely gets rid of weston_output_enable_undo() so I do not need to
try to figure out what to do with it later.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

Move the wl_output global management into weston_compositor_add_output()
and weston_compositor_remove_output().

If weston_output_enable() fails, there is no need to clean up the global
and the clients will not see a wl_output come and go.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

Move the output id management into weston_compositor_add_output() and
weston_compositor_remove_output(). This is a more logical place, and
works towards assimilating weston_output_enable_undo().

The output id is no longer available to the backend enable() vfuncs, but
it was not used there to begin with.

v2: moved assert earlier in weston_compositor_add_output()

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

Enabling an already enabled output is an error, at least with the
current implementation.

However, disabling an output that has not been enabled is ok.

Cope with the first and document the second.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

It was ambiguous what this flag meant - it did not mean whether the
backend is considering this output to be enabled, because
weston_output_destroy() unsets it while deliberately not calling the
backend disable() vfunc.

Perhaps the most clear definition is with respect to the output's
assignment in the pending vs. enabled output lists. There is also a whole
bunch of variables that are allocated only when enabled is true.

Since the flag is related to the list membership, set and clear the flag
only when manipulating the lists.

Assert that weston_compositor_add_output() and
weston_compositor_remove_output() are not called in a wrong state.

v2:
- talk about "list of enabled outputs"
- clear 'enabled' in weston_compositor_remove_output() earlier

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

weston_compositor_add_pending_output() is the point through which all
backends must go when creating a new output. The enable and disable
vfuns are essential for anything to be done with the output, so it makes
sense to check them here, rather than when actually enabling or
disabling.

Particularly the disable vfunc is rarely called, so this gets the check
better excercised.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

Only used internally in core. Needs to happen automatically when
something changes, so there should no need to call it from outside.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

Only used by weston_output_enable().

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

Document two more functions of the weston_output API.

Exported functions marked internal are meant for backends only.
Exported functions not marked internal are meant for libweston users.

v2: talk about "list of enabled outputs".

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

A weston_output available to the compositor should always be either in
the list of pending outputs or the list of enabled outputs. Let
weston_compositor_add_output() and weston_compositor_remove_output()
handle the moves between the lists.

This way weston_output_enable() does not need to remove and
oops-it-failed-add-it-back. weston_output_disable() does not need to
manually re-add the output back to the pending list.

To make everything nicely symmetric and fix any unbalancing caused by
this:
- weston_output_destroy() explicitly wl_list_remove()s
- weston_compositor_add_pending_output() first removes then inserts, as
we have the assumption that the link is always valid, even if empty.

Update the documentations, too.

v2:
- talk about "list of enabled outputs"
- keep wl_list_remove in weston_compositor_remove_output in its old
  place

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

To shorten lines.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

Trying to make it more readable. Things that happen in the same step are
kept in the same paragraph.

v2: talk about "list of enabled outputs"

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

Michael Teyfel authored 7 years ago and Pekka Paalanen committed 7 years ago

Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 7 years ago

Dead code as orientation cannot be changed anymore, see patches:
ivi-shell: remove layer_set_orientation API
ivi-shell: remove surface_set_orientation API

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: added commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 7 years ago

This API is used to rotate the contents of
application's buffer, which are in the render
order list of the layer. But this API is not
needed because an application can rotate
its buffers with set_buffer_transform request
of wl_surface interface

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 7 years ago

This API is used to rotate the contents of
application's buffer. But it is not needed
because an application can rotate its buffers
with set_buffer_transform request of
wl_surface interface.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 7 years ago

It is analagous to layer_remove_surface API.
The API removes a layer from the render order
of the screen.

v3:
add the new vfunc at the end of
the ivi_layout_interface struct.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Eugen Friedrich <friedrix@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

When we receive configure_notify we should update the surface's
position by calling xwayland_api->set_xwayland(). Otherwise some surfaces
like dnd surfaces from xwayland views are "stuck" at one place. When
setting XWAYLAND state though we should always call view_set_position(),
not just the first time we set this state.

Signed-off-by: Ilia Bozhinov <ammen99@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

Now we keep track of serial->state association and we discard the states
that the client ignored.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>

We were checking against the pending size, which lead some clients
(simple-egl) to crash because they sent a buffer before acknowledging
the latest configure event.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Tested-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Tested-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>

Cosmetic leftovers I missed when removing the configure
option to --disable-xkbcommon

Reviewed-by: Daniel Stone <daniels@collabora.com>

Derek Foreman authored 7 years ago and Daniel Stone committed 7 years ago

We need to make sure the client bound dmabuf with a high enough
version to receive modifier events before sending them or the
client will crash.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Derek Foreman authored 7 years ago and Daniel Stone committed 7 years ago

We shouldn't free &modifier_invalid because it wasn't allocated
with malloc()

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Derek Foreman authored 7 years ago and Daniel Stone committed 7 years ago

Some log messages weren't terminated with a newline.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Derek Foreman authored 7 years ago and Daniel Stone committed 7 years ago

It looks like there are some code paths where this has been forgotten, so
it likely doesn't work as is.  It's probable that nobody has actually
used this in a very long time, so it's not worth the maintenance burden
of keeping xkbcommon vs raw keyboard code anymore.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

When switching a state twice in a row, we were overwriting the old value
without setting it back, sending a wrong state to the client.

Now we update our requested state, then check if we need to schedule a
configure event, if we have one scheduled already or even if we can
cancel it.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Varad Gautam authored 8 years ago and Daniel Stone committed 7 years ago

mesa's freedreno driver supports importing dmabufs with format
DRM_FORMAT_NV12 and DRM_FORMAT_MOD_SAMSUNG_64_32_TILE modifier.
demonstrate weston modifier advertising and import path using this
combination when run with --import-format=NV12.

v2:
 - hard code format if platform doesn't implement
   EGL_EXT_image_dma_buf_import_modifiers and cannot advertise
   format/modifier support.
 - squash using valid frame data to fill dmabuf planes

Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Varad Gautam authored 7 years ago and Daniel Stone committed 7 years ago

abstract drm specific bits to struct drm_device and support running on
freedreno. introduce 'modifier' event.

v2: rebase to master, deprecate 'format' event.

Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Varad Gautam authored 8 years ago and Daniel Stone committed 7 years ago

this will allow adding other drm backends later.

Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Varad Gautam authored 8 years ago and Daniel Stone committed 7 years ago

EGL_EXT_image_dma_buf_import_modifiers supports importing upto four dmabuf
planes into an EGLImage.

v2: correct PLANE3_PITCH token (Daniel Stone)

Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Varad Gautam authored 8 years ago and Daniel Stone committed 7 years ago

pass over the modifier attributes to EGL.

v2: ensure same modifier is passed for all planes (Daniel Stone)

Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Varad Gautam authored 7 years ago and Daniel Stone committed 7 years ago

implement 'modifier' event to communicate available formats and modifiers
to the client and support zwp_linux_dmabuf_v1 interface version 3.

v2: handle zero modifiers case, deprecate 'format' event.

Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Varad Gautam authored 8 years ago and Daniel Stone committed 7 years ago

EGL_EXT_image_dma_buf_import_modifiers allows querying the formats
and modifiers supported by the platform. expose these to the compositor.

v2:
 - change calloc args (Daniel Stone)
 - check for modifier support before querying formats (Daniel Stone)

Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Varad Gautam authored 7 years ago and Daniel Stone committed 7 years ago

request immediate dmabuf import when run with "immed" arg.

Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

Varad Gautam authored 7 years ago and Daniel Stone committed 7 years ago

handle create_immed() dmabuf import requests and support
zwp_linux_dmabuf_v1_interface version 2.

v2: terminate client with INVALID_WL_BUFFER when reason
    for create_immed failure is unknown.

[daniels: Bump wayland-protocols dependency.]

Signed-off-by: Varad Gautam <varad.gautam@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>