- boot failure fix for Intel edison
- tangier wdt conversion to driver model

Convert legacy driver to use watchdog class.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Roese <sr@denx.de>

The default timeout value had been left in order to leave some traces
about default setup of watchdog done by firmware.

For better understanding and compiler burden, replace it with a comment.

Suggested-by: Stefan Roese <sr@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

This breaks Intel Edison to work. It gets laggish and unable to boot kernel.

Reverts commit 665cb18e for now
till better solution will be proposed.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

Pull request for UEFI sub-system for v2019.07-rc5 (3)

This pull request provides error fixes for the graphical output protocol,
the text output protocol, and the extended text input protocol.

Setting the boot device for the bootefi command is now not only supported
by the 'load' command but also for the file system specific commands like
'fatload'.

- Assorted small fixes
- Bugfix RSA handling code to reject images with unknown padding.
- Some boards disabled unused features to turn off DM warnings.

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

This board does not require watchdog support.

Signed-off-by: Felix Brack <fb@ltec.ch>

When build SPL_OF_PLATDATA on i.MX6, meet issue the fdtdec_get_int
not defined, however fdtdec.c will use fdtdec_get_int, so let's
compile fdtdec_common.c when OF_LIBFDT selected.

Since there is also SPL_OF_LIBFDT, so need to use
CONFIG_$(SPL_TPL_)OF_LIBFDT.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

commit b7598a43 ("[PATCH] Avoid assigning PCI resources from
zero address") only moved the bus lower address to 0x1000 if the
given bus start address is zero. The comment said 0x1000 is a
reasonable starting value, hence we'd better apply the same
adjustment when the given bus start address is below 0x1000.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>

IDE devices are no longer automatically probed by u-boot, so it should
be done by the distro boot command before attempting to boot from IDE
(just like scsi and nvme)

Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>

Avnet Ultra96 dts file should be also cover by MAINTAINERS fragment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

NXP's LS1028 and LX2160 platform build support added via buildman
in travis.yml.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>

blk_get_device_by_str was skipping part_init when hw partition 0 was
selected because it is the default. However, this caused issues when
switching to a non-zero partition and then back to partition zero, as
stale data from the wrong partition was returned.

Remove this optimization and call part_init regardless of the selected
partition.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>

Signed-off-by: Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>

Misspelling of SPDX-License-Identifier is rather fatal than other
general typos, so must be fixed.

This file spells SPDX-Licence-Identifier.
                           ^

I also moved it to the very top of the file with // comment style.

Detected by grepping the source tree:

$ git grep --not -e SPDX-License-Identifier --and -e SPDX-
board/armltd/vexpress64/pcie.c: * SPDX-Licence-Identifier:      GPL-2.0+

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Liviu Dudau <liviu.dudau@foss.arm.com>

Extra "not DM" controllers support is disabled.
u-boot BSP still good enough to upgrade and run images.

Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>

Remove square brackets around label in state command description.

Fixes: ea41b156 ("cmd/led: check subcommand "list" instead "l"")
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>

Previously we would store NULL in info->padding and jump to an illegal
instruction if an unknown value for "padding" was specified in the
device tree.

Signed-off-by: Patrick Doyle <pdoyle@irobot.com>

- Assorted minor fixes

%s/efi_efi_/efi_/

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

If a variable cannot be set, always show an information message.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

efi_status_t and int are of different size. Use separate variables for
return codes of different type.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

fatload command can be used to load the EFI payload since EFI system
partition is always a FAT partition. Call into EFI code from do_load()
to set the device path from which the last binary was loaded. An EFI
application like grub2 can’t find its configuration file without the
device path set.

Since device path is now set in do_load() there is no need to set it
in do_load_wrapper() for the load command.

Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

If EFI_FILE_PROTOCOL.Delete() fails, always close the handle and return
EFI_WARN_DELETE_FAILURE.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

If no matching package list is found in ListPackageLists(), return
EFI_NOT_FOUND.

If we do not support a package type, we will not find a matching package
list. Remove the unreachable EFI_PRINTF() statements.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Avoid to signal that the left logo key is pressed, when it is not.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Depending on the key board alternative scan codes are used for F5, END, and
HOME.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

For 5:6:5 modes provide correct frame buffer information.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() must blank the screen.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

When setting up the system table avoid superfluous void * conversions.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

EFI_SIMPLE_TEXT_OUTPUT_PROTOCOL.Reset() is a function and not a void *
pointer.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode() must allocate a buffer for the
mode information structure.

Adjust the unit test to free the buffer.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

If EFI_GRAPHICS_OUTPUT_PROTOCOL.SetMode() is called with an invalid mode,
return EFI_UNSUPPORTED.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Check the parameters of EFI_GRAPHICS_OUTPUT_PROTOCOL.QueryMode().

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

If EFI_GRAPHICS_OUTPUT_PROTOCOL.Blt() is called with an invalid value of
BltOperation return EFI_INVALID_PARAMETER.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>

Signed-off-by: Shannon Barber <sbarber@dataspeedinc.com>

If flash_write fails, whilst we propagate this up to our caller, we need
to avoid swapping in the new file (if we're on a filesystem) in this
case.

Fixes: dbc34323 ("tools: env: Implement atomic replace for filesystem")
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>

Commit ad7061ed ("doc: Move device tree bindings documentation to
 doc/device-tree-bindings") moved all device tree binding documentation
to doc/device-tree-bindings directory.

The current U-Boot project still have two documentation directories:

- doc/
- Documentation/

Move all documentation and sphinx files to doc directory so all content
can be in a common place.

Signed-off-by: Breno Lima <breno.lima@nxp.com>

The driver was using milliseconds and programming it into a register
which takes ticks of the watchdog clock, which runs at 1MHz. This meant
we were off by 1000 with the desired value.

When 06985289 ("watchdog: Implement generic watchdog_reset()
version") was added the aspeed board would leave the watchdog running,
causing it to bite before u-boot was done.

Discovered by booting in qemu:

  $ qemu-system-arm -M ast2500-evb -drive file=test.img,format=raw,if=mtd -nographic -no-reboot -d cpu_reset

  U-Boot 2019.07-rc3-00091-g2253e40caef5 (Jun 06 2019 - 16:53:23 +0930)

  Model: Aspeed BMC
  DRAM:  496 MiB
  WDT:   Started with servicing (60s timeout)
  MMC:
  In:    serial@1e784000
  Out:   serial@1e784000
  Err:   serial@1e784000
  Watchdog timer expired.

Fixes: 06985289 ("watchdog: Implement generic watchdog_reset() version")
Signed-off-by: Joel Stanley <joel@jms.id.au>