This fixes a regression where monitor make and model would always be
advertised as "unknown" to Wayland clients. The EDID strings were parsed
at create_output_for_connector() time, but the fallback "unknown" values
were set in weston_drm_output_api::set_mode vfunc later. This made the
correct monitor info be shown in the log, but not sent to clients.

The purpose of the "unknown" assignments is to give fallback values in
case EDID is not providing them.

Fix all that by moving all setting of the make, model and serial into
create_output_for_connector(). These values cannot change afterwards
anyway. While at it, document find_and_parse_output_edid().

The ugly casts in create_output_for_connector() are required to silence
compositor warnings from ignoring const attribute. This is temporary,
and a future refactoring will get rid of the casts.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Move the weston_output_init() call into wayland_output_create_common().
This avoids passing the name twice to different functions, and follows
the precedent set in "libweston: weston_output_init(..., +name)" for
calling init before accessing fields.

Since the error paths in wayland_output_create_for_parent_output() and
wayland_output_create_fullscreen() are now guaranteed to have
weston_output init'd, call weston_output_destroy() appropriately. There
might be more to free than just the name.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Add 'name' argument to weston_output_init(). This is much more obvious
than the assert inside weston_output_init() to ensure the caller has set
a field in weston_output first.

Now weston_output_init() will strdup() the name itself, which means we
can drop a whole bunch of strdup()s in the backends. This matches
weston_output_destroy() which was already calling free() on the name.

All backends are slightly reordered to call weston_output_init() before
accessing any fields of weston_output, except the Wayland backend which
would make it a little awkward to do it in this patch. Mind, that
weston_output_init() still does not reset the struct to zero - it is
presumed the caller has done it, since weston_output is embedded in the
backend output structs.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

There are IVI tests that require an output. Previously these tests would
silently skip if no outputs were present. However, a test setup should
always have outputs with these tests. Skipping could easily leave the
tests dead without notice.

Make these tests fail instead of skip if there are no outputs.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Simplifies the code, and makes moving weston_output_init() into
wayland_output_create_common() a little easier.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Gets rid of the constant size char array.

While here, document the function.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Initialize the list in weston_output_init() instead of doing it
separately in each backend.

One would expect weston_output_init() to initialize all weston_output
members, at least those that are not NULL.

We rely on the set_size() functions to be called only once, as is
assert()'d. If set_size() becomes callable multiple times, this patch
will force them to be fixed to properly manage the mode list instead of
losing all members.

compositor-wayland.c is strange in
wayland_output_create_for_parent_output(): it first called
wayland_output_set_size() that initialized the mode list with a single
mode manufactured from width and height and set that mode as current.
Then it continued to reset the mode list and adding the list of modes
from the parent output, leaving the current mode left to point to a mode
struct that is no longer in the mode list and with a broken 'link'
element. This patch changes things such that the manufactured mode is
left in the list, and the parent mode list is added. This is probably
not quite right either.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ian Ray authored 7 years ago and Pekka Paalanen committed 7 years ago

This patch disables the opacity binding when the modifier is configured
to `none' in weston.ini, and thus supports use cases where one does not
want to have this binding.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ian Ray authored 7 years ago and Pekka Paalanen committed 7 years ago

This patch changes the zoom binding to use the modifier configured in
weston.ini instead of hardcoding MODIFIER_SUPER.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Fabien Lahoudere authored 7 years ago and Pekka Paalanen committed 7 years ago

When calibrating touchscreen with weston-calibrator, you can use the mouse to
click on the cross which is recorded as a touch event. This event is used to
compute the final calibration of the touchscreen which results in invalid
touchscreen calibration and broken touchscreen behaviour.

In order to avoid to use the mouse in weston-calibrator, we disable mouse
operation by default and add a parameter "--enable-mouse" to enable it.

Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Eric Engestrom authored 7 years ago and Pekka Paalanen committed 7 years ago

weston_check_egl_extension() returns a bool, not a pointer.

Fixes: ce5b614c "clients/nested: use weston_check_egl_extension
                             over strstr"
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 7 years ago

Remove the option, because it is hard to use.
Drm connector ids are hard to reach for users,
and they can change when kernel or device tree
is modified.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
[Pekka: bump WESTON_DRM_BACKEND_CONFIG_VERSION]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Michael Teyfel authored 7 years ago and Pekka Paalanen committed 7 years ago

Two cases are tested: success and fail case of the screen-remove-layer API.

Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Quentin Glidic authored 7 years ago and Daniel Stone committed 7 years ago

The old code for scheduling configure events on idle looked like:
if (configure_scheduled) {
    if (this_event_is_the_same) {
        remove_timer();
return;
    }
}

If we queued one new event (either changed, or the client had never
received any configure event), followed immediately by one event which
was the same as the first, we would delete the scheduled send of the
first event.

Fix this by treating unconfigured surface as never the same.

Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>

drm_pending_state is currently skeletal, but will be used to retain
data through begin_repaint -> assign_planes -> repaint -> repaint_flush.

The flush and cancel functions are currently identical, only freeing the
state, but they will be used for different purposes in later patches.
Specifically, the intent is to apply any pending output changes (through
PageFlip/SetCrtc, or the atomic ioctls) in flush, and only free the
state in cancel.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Retain drm_plane tracking objects for all actual DRM planes when using
universal planes, not just overlay planes. Rename uses of 'sprite' to
'plane' to make it clear that it can now be any kind of plane, not just
an overlay/sprite.

These are currently unused.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Pekka Paalanen authored 9 years ago and Daniel Stone committed 7 years ago

Add awareness of, rather than support for, universal planes. Activate
the client cap when we start if possible, and if this is activated,
studiously ignore non-overlay planes. For now.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Co-authored-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Add a cache for DRM property IDs and values, and use it for the two
connector properties we currently update: DPMS and EDID.

As DRM property ID values are not stable, we need to do a name -> ID
lookup each run in order to discover the property IDs and enum values to
use for those properties. Rather than open-coding this, add a property
cache which we can use across multiple different object types.

This patch takes substantial work from the universal planes support
originally authored by Pekka Paalanen, though it has been heavily
reworked.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

All planes being displayed have a framebuffer. What makes 'fb_plane'
special is that it's being displayed as the primary plane by KMS.

Previous patchsets renamed this to 'primary_plane' to match the KMS
terminology, namely the CRTC's base plane, which is controlled by
drmModeSetCrtc in the legacy API, and identified by PLANE_TYPE ==
"Primary" in the universal-plane API.

However, Weston uses 'primary_plane' internally to refer to the case
where client content is _not_ directly displayed on a plane, but
composited via the renderer, with the result of the compositing then
shown.

Rename to 'scanout_plane' as our least-ambiguous name, and document it a
bit.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>

Pekka Paalanen authored 10 years ago and Daniel Stone committed 7 years ago

This moves the single sprite creation code from create_sprites() into a
new function. The readability clean-up is small, but my intention is to
write an alternate version of create_sprites(), and sharing the single
sprite creation code is useful.

The removal code now actually removes the plane from the list.

In doing this, the gymnastics required to exact the CRTC ID the plane
was last on when making a disabling drmModeSetPlane call have been
removed; specifying the CRTC is not necessary when disabling a plane.
(The atomic API goes a step further, mandating it be zero.)

[daniels: Genericised from drm_sprite to drm_plane, moving some of the
          logic back into create_sprites(), also symmetrical
          drm_plane_destroy.]

Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Emre Ucan <eucan@de.adit-jv.com>

Fixes the failure to start with fbdev-backend:

weston: /home/pq/git/weston/libweston/compositor.c:4733: weston_compositor_add_pending_output: Assertion `output->disable' failed.

The disable hook was completely unimplemented, and the regression was
caused by e952a01c
"libweston: move asserts to add_pending_output()".
It used to work because Weston never tried to explicitly disable the
fbdev output, but now it is hitting the assert.

Fix it by tentatively implementing a disable hook. It has not been
tested to work for explicit disabling, but it does solve the regression.

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=102208


Cc: bluescreen_avenger@verizon.net
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
Tested-by: n3rdopolis <bluescreen_avenger@verizon.net>

It's been unused since the legacy (non-libinput) input backends have
been removed.

Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

The GCC address sanitizer overrides dlopen and dlclose, so the configure
test does not detect libdl as a needed dependency for linking. It is
still needed though, as dlsym is not exported by the sanitizer. The
result is that linking fails in the end.

Fix this by checking for dlsym instead of dlopen.

This can be reproduced by configuring the build with:
CFLAGS="-fsanitize=address -fsanitize=undefined"
LDFLAGS="-fsanitize=address -fsanitize=undefined"

Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

Fixes "configure: error: Weston version is greater than libweston."

Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=102143


Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

A 3.0 branch has been established for stable release work.

Without this weston crashes when a client using xdg-shell-v5 is run.

Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

xdg_shell requires this information to be shared with the client in
order to conform with the specification.

The code to forward this to the client by way of a configure() event
is already in place and works fine, it was just never being used until
now.

Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

commit 749637a8
introduced this feature, but the break is outside of any conditional
so only the first item in the list is ever tested.

If a client skips a few configures and then acks the most recent
it's still operating within spec, so the break should only occur
when a match is found.

This version also adds a break after we miss the target, as a tiny
optimization (the list will be cleaned up on disconnect anyway),
as it makes the code no more difficult to read or maintain.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

Derek Foreman authored 7 years ago and Pekka Paalanen committed 7 years ago

This is easily noticed as a leaked fd on every VC switch.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Fix a regression with VT-switching away from Weston and then back
causing drmModePageFlip() to fail with ENOSPC or EINVAL, leaving one or
more outputs not updated. The regression appeared in
47224cc9:

	compositor-drm: Delete drm_backend_set_modes

Fix it by forcing a drmModeSetCrtc() on all outputs both initially
created and after VT-switch in.

Cc: Daniel Stone <daniels@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

v2: moved state_invalid=true from create_output_for_connector() to
    drm_output_enable()

Reviewed-by: Daniel Stone <daniels@collabora.com>

Derek Foreman authored 7 years ago and Pekka Paalanen committed 7 years ago

We still need to close fds passed to us - or we leak quite a few fds
on VC switch.

Regression, originally fixed in 8f5acc2f
and re-broken in commit 72dea06d
but only for the logind launcher.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Shell surfaces may have a geometry that is different to the size of
their main surface, e.g. due to subcompositing.

In states where size is strictly enforced (fullscreen and maximized),
the size that the compositor wants must be checked against the window
geometry and not just the main surface size.

Fix by calling weston_desktop_surface_get_geometry and using that size
instead of main surface size.

Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

The focused surface is used for determining whether shell surfaces
are activated. They should also be considered activated when a
subsurface has focus. Inserting a call to
weston_surface_get_main_surface fixes this.

seat->focused_surface is only used for shell_surface keyboard focus
tracking.

Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>

This is a simple wrapper for casting the user data of a wl_resource into
a struct weston_output pointer. Using the wrapper clearly marks all the
places where a wl_output protocol object is used.

Replace ALL wl_output related calls to wl_resource_get_user_data() with
a call to weston_output_from_resource().

v2: add type assert in weston_output_from_resource().

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

It really is a boolean.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>

It's a little awkward to try to keep the weston_output::region and
weston_output::previous_damage allocate exactly only when the output is
enabled. There was also a leak: weston_output_move() was calling
weston_output_init_geometry() on an already allocated regions without
fini in between.

Fix both issues by allocating the regions in weston_output_init(),
always fini/init'ing them in weston_output_init_geometry(), and fini'ing
for good in weston_output_destroy().

This nicely gets rid of weston_output_enable_undo() so I do not need to
try to figure out what to do with it later.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>