There are IVI tests that require an output. Previously these tests would
silently skip if no outputs were present. However, a test setup should
always have outputs with these tests. Skipping could easily leave the
tests dead without notice.

Make these tests fail instead of skip if there are no outputs.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Michael Teyfel authored 7 years ago and Pekka Paalanen committed 7 years ago

Two cases are tested: success and fail case of the screen-remove-layer API.

Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 7 years ago

This API is used to rotate the contents of
application's buffer, which are in the render
order list of the layer. But this API is not
needed because an application can rotate
its buffers with set_buffer_transform request
of wl_surface interface

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 7 years ago

This API is used to rotate the contents of
application's buffer. But it is not needed
because an application can rotate its buffers
with set_buffer_transform request of
wl_surface interface.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

Test adds 3 layers in a screen's render order list.
First, it adds in the order which layers are created.
Later, test cleans the render order list,
and adds layers in reverse order.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>

This clarifies what is supposed to be the libweston code.

v2: screen-share.c is already in compositor/ instead.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Benoit Gschwind <gschwind@gnu-log.net>
Acked-by: Benoit Gschwind <gschwind@gnu-log.net>
[Pekka: rebased]

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

The add_notification_configure_surface API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to
add_listener_configure_surface.

This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
   by controller plugins
3. Remove API is not needed. Controller plugins can easily
   remove the listener link.

The remove API is removed too:
- ivi_layout_remove_notification_configure_surface

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

The add_notification_remove_surface API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to add_listener_remove_surface.

This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
   by controller plugins
3. Remove API is not needed. Controller plugins can easily
   remove the listener link.

The remove API is removed too:
- ivi_layout_remove_notification_remove_surface

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

The add_notification_remove_layer API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to add_listener_remove_layer.

This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
   by controller plugins
3. Remove API is not needed. Controller plugins can easily
   remove the listener link.

The remove API is removed too:
- ivi_layout_remove_notification_remove_layer

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

The add_notification_layer_surface API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to add_listener_layer_surface.

This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
   by controller plugins
3. Remove API is not needed. Controller plugins can easily
   remove the listener link.

The remove API is removed too:
- ivi_layout_remove_notification_create_layer

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

The add_notification_create_surface API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to
add_listener_create_surface.

This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
   by controller plugins
3. Remove API is not needed. Controller plugins can easily
   remove the listener link.

The remove API is removed too:
- ivi_layout_remove_notification_create_surface

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

The layer_add_notification API accepts a simple
wl_listener instead of a ivi-shell specific notification
function. Therefore, the API is renamed to layer_add_listener.

This change has several advantages:
1. Code cleanup
2. No dynamic memory allocation. Listeners are allocated
   by controller plugins
3. Remove API is not needed. Controller plugins can easily
   remove the listener link.

This patch also remove two APIs which are not needed:
- ivi_layout_layer_remove_notification
- ivi_layout_layer_remove_notification_by_callback

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

IVI layout APIs now are called with weston_output pointers,
instead of ivi_layout_screen pointers.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Wataru Natsume <wnatsume@jp.adit-jv.com>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

The compositor data struct already has a list of weston outputs.
Therefore, this API is not required.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Wataru Natsume <wnatsume@jp.adit-jv.com>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

The controller plugins can get the screen resolution directly from
weston output. Therefore, this API is not required.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Wataru Natsume <wnatsume@jp.adit-jv.com>

Ucan, Emre (ADITG/SW1) authored 8 years ago and Pekka Paalanen committed 8 years ago

ivi-screen does not have an id. IVI layout implementation is using
id of weston output. Therefore, this API is unnecessary.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Wataru Natsume <wnatsume@jp.adit-jv.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Acked-by: wataru_natsume <wataru_natsume@xddp.denso.co.jp>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>

The name of ivi_controller_interface is changed to ivi_layout_interface
with this patch.

This name is better suited to the interface, because it is implemented
in ivi-layout.c and its methods are linked to ivi_layout* functions.

Furthermore, the controller modules (e.g. hmi-controller) are the users
of this interface and they have their own interfaces,
which are called *_controller_interface,
e.g.: ivi_hmi_controller_interface.

This causes confusion about the software architecture.

Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>

Nobuhiko Tanibata authored 9 years ago and Pekka Paalanen committed 9 years ago

These tests are implemented on test suite framework, which provides
internal method validation,
Following features are tested,
- add notification of ivi-layer with bad parameter
- add notification of ivi-surface configure with bad parameter
- add notification of creating ivi-layer with bad parameter
- add notification of creating ivi-surface with bad parameter
- add notification of removing ivi-layer with bad parameter
- add notification of removing ivi-surface with bad parameter

Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Nobuhiko Tanibata authored 9 years ago and Pekka Paalanen committed 9 years ago

These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested,
- notification of adding ivi-layer
- notification of creating ivi-layer
- notification of removing ivi-layer

Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Nobuhiko Tanibata authored 9 years ago and Pekka Paalanen committed 9 years ago

These tests are implemented on test suite framework, which provides
internal method validation,
Following features are tested,
- ivi-screen operation with bad parameter
- render order with bad parameter
- destroy ivi-layer in the ivi-screen and call commit_changes

Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Nobuhiko Tanibata authored 9 years ago and Pekka Paalanen committed 9 years ago

These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested,
- ivi-screen id
- ivi-screen resolution
- render order of ivi-layers in ivi-screen

Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Nobuhiko Tanibata authored 9 years ago and Pekka Paalanen committed 9 years ago

These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested for ivi-layer,
- create with bad parameter
- visibility with bad parameter
- opacity with bad parameter
- destination rectangle with bad parameter
- orientation with bad parameter
- dimension with bad parameter
- position with bad parameter
- source rectangle with bad parameter
- properties with bad parameter
- destroy ivi-layer and call set_visibility_commit_changes
- destroy ivi-layer, call set_opacity, and commit_changes
- destroy ivi-layer, call set_orientation, and commit_changes
- destroy ivi-layer, call set_dimension, and commit_changes
- call set_position, destroy ivi-layer, and commit_changes
- call set_source_rectangle, destroy ivi-layer, and commit_changes
- call set_destination_rectangle, destroy ivi-layer, and commit_changes
- create duplicate
- destroy ivi-layer and call get_layer

Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Nobuhiko Tanibata authored 9 years ago and Pekka Paalanen committed 9 years ago

These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested for ivi-layer,
- create
- visibility
- opacity
- orientation
- dimension
- position
- destination rectangle
- source rectangle

Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Nobuhiko Tanibata authored 9 years ago and Pekka Paalanen committed 9 years ago

These tests are implemented on test suite framework, which provides
internal method validation.
Following features are tested for ivi-surface,
- destination_rectangle with bad parameter
- orientation with bad parameter
- dimension with bad parameter
- position with bad parameter
- source_rectangle with bad parameter
- properties with bad parameter

Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>

Using the parent '../' path component in #include statements makes
the codebase more rigid and is redundant due to proper -I use.

Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>